[PATCH V3] drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The refresh reported by modetest is 60.46Hz, and the actual measurement
is 60.01Hz, which is outside the expected tolerance. Adjust hporch and
pixel clock to fix it. After repair, modetest and actual measurement were
all 60.01Hz.

Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate
is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte
by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime
/DSI CLK. Assume that the DSI controller could not make the mode that we
requested(presumably it's PLL couldn't generate the exact pixel clock?).
If you use a different DSI controller, you may need to readjust these
parameters. Now this panel looks like it's only used by me on the MTK
platform, so let's change this set of parameters.

Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
Chage since V2:

- Update commit message.

V2: https://lore.kernel.org/all/20231117032500.2923624-1-yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Chage since V1:

- Update commit message.

V1: https://lore.kernel.org/all/20231110094553.2361842-1-yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
---
 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 4f370bc6dca8..5f7e7dee8a82 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -1768,11 +1768,11 @@ static const struct panel_desc starry_qfh032011_53g_desc = {
 };
 
 static const struct drm_display_mode starry_himax83102_j02_default_mode = {
-	.clock = 161600,
+	.clock = 162850,
 	.hdisplay = 1200,
-	.hsync_start = 1200 + 40,
-	.hsync_end = 1200 + 40 + 20,
-	.htotal = 1200 + 40 + 20 + 40,
+	.hsync_start = 1200 + 50,
+	.hsync_end = 1200 + 50 + 20,
+	.htotal = 1200 + 50 + 20 + 50,
 	.vdisplay = 1920,
 	.vsync_start = 1920 + 116,
 	.vsync_end = 1920 + 116 + 8,
-- 
2.25.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux