Re: [PATCH V2] drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Sat, Nov 18, 2023 at 1:11 AM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Thu, Nov 16, 2023 at 7:25 PM Cong Yang
> <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
> >
> > The refresh reported by modetest is 60.46Hz, and the actual measurement
> > is 60.01Hz, which is outside the expected tolerance.
>
> Presumably you've swapped the numbers above? The value reported by
> modetest is 60.01Hz and the actual measurement is 60.46Hz?

No, the value reported by modetest is 60.46Hz.


>
> > Adjust hporch and
> > pixel clock to fix it. After repair, modetest and actual measurement were
> > all 60.01Hz.
> >
> > Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate
> > is HS->LP cycle time(Vblanking). Measured frame rate is not only affected
> > by Htotal/Vtotal/pixel clock, also affecte by Lane-num/PixelBit/LineTime
>
> s/affecte/affected
>
> For me, the important part would be to explain the reason for the
> difference. I assume that the DSI controller could not make the mode
> that we requested exactly (presumably it's PLL couldn't generate the
> exact pixel clock?). This new mode was picked to be achievable by the
> DSI controller on the system that the panel is used on.
>
>
> > /DSI CLK. If you use a different SOC platform mipi controller, you may
> > need to readjust these parameters. Now this panel looks like it's only used
> > by me on the MTK platform, so let's change this set of parameters.
> >
> > Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel")
> > Signed-off-by: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> > ---
> > Chage since V1:
> >
> > - Update commit message.
> >
> > V1: https://lore.kernel.org/all/20231110094553.2361842-1-yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > ---
> >  drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
>
> As per discussion in V1, I'm OK with this.
>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
>
> I'll probably give it at least another week before applying in case
> anyone else wants to speak up. It would be nice if you could send a V3
> with a few more touchups to the commit message, especially since the
> 60.01 and 60.46 numbers were backward (unless I'm mistaken).
>
>
> -Doug




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux