Re: [PATCH 2/8] drm/loongson: Introduce a drm bridge driver for it66121 HDMI transmitter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,


On 2023/10/30 21:48, Dmitry Baryshkov wrote:
On Mon, 30 Oct 2023 at 15:26, Sui Jingfeng <suijingfeng@xxxxxxxxxxx> wrote:
Hi,


On 2023/10/30 18:01, Dmitry Baryshkov wrote:
On Mon, 30 Oct 2023 at 11:42, Sui Jingfeng <suijingfeng@xxxxxxxxxxx> wrote:
Hi,


On 2023/10/30 06:53, Dmitry Baryshkov wrote:
On Sun, 29 Oct 2023 at 21:46, Sui Jingfeng <suijingfeng@xxxxxxxxxxx> wrote:
The IT66121 is a DVO to HDMI converter, LS3A5000+LS7A1000 ML5A_MB use this
chip to support HDMI output. Thus add a drm bridge based driver for it.
This patch is developed with drivers/gpu/drm/bridge/ite-it66121.c as base.
Please use the original bridge driver instead of adding a new one.
I'm agree with the spirit of code sharing, but this is nearly impossible for non-DT system.

Because the original bridge driver(say it66121.ko) is fully dependent on the DT.
I can not agree here. It doesn't depend on DT. It has fully populated
i2c_device_id structures, so it will work with bare I2C buses.
Most likely you will have to change of calls into fwnode calls, that's it.

UEFI+ACPI based system can not use with it.

Our I2C adapter is created by the drm/loongson.ko on the runtime.
The potential problem is that *cyclic dependency* !

I2C adapter driver is depend on drm/loongson
drm/loongson depend on drm bridge driver (say it66121.ko)
drm bridge driver (say it66121.ko) depend on I2C adapter to setup.

This plus the defer probe mechanism is totally a trap,
incurring troubles and don't work.
Welcome. We had this kind of issue for DP AUX buses.

I can suggest the following approach:
- In the root probe function you can create an i2c bus and populate it
with the i2c devices.
- I have not checked whether you use components or not. If not, please
use an auxiliary or a platform device for the main DRM functionality.
- In the subdevice probe / bind function you check for the next
bridge. Then you get one of the following:drm_bridge pointer,
-EPROBE_DEFER, or any other error case. Your driver can react
accordingly.
I have similar way to solve this problem, and I have solved it one and a half years ago.
See [1] for a reference.

[1] https://patchwork.freedesktop.org/patch/478998/?series=99512&rev=11

When the PCI device get probed, we create the I2C bus first.
This ensure that when drm/lsdc.ko get loaded, the I2C bus is presence
and ready to be get by the drm_bridge driver.
This is basically a PCI-to-GPIO-emulated-I2C adapter,
then wait the display bridges driver get loaded and set up.

I also need to create a virtual platform device for the display controller.
which allow the drm drivers instance for this virtual platform device
be able to probed due to defer probe mechanism.

This solution made the framework of my driver distortion severely,
I don't think I could catch this phrase. Did you see distortions on the screen?


I means that it destroy the my drm driver's framework.
I means that we are all-in-one driver. The solution you
mentioned have side effect also. That is because user-space
will open the PCI device first, not your created virtual platform device.



and in the end we still solve a easy problem by workaround.
No workarounds for the kernel subsystems are allowed.


I means that the idea(solution) you told me is still a workaround.
bring no benifits to the drm driver itself.


I know how to use the component framework also, but the component framework just
a wrapper. Similar with above approach, it brings no gains in the end.
It does not make this driver better. I got trapped one years ago,
and I don't want to got trapped another time.
And I know how solve such a problem by workaround, but that's not worthy for the effort.

I think my approach provide a solution, while still keep the bridges drivers
to a modular at the same time. Despite simple, it indeed solve the problem.
It simple because of explicit control of the loading order by myself, not by
rely on the framework or something else (say component)
PCI media drivers have had this issue for ages. And all of them found
a way to work.

I have said that PCI KMS display drivers is different,  because of user space open the PCI device.


It is not totally duplicating, I have rewrite part of them.
This is even worse. Now one can not apply fixes to the second one.


I don't need to either, I want to maintain this by myself.


You can compare
to see what I'm changed. It is just that it66162 was upstream-ed earlier than
our solution. But I also have write display drivers for lt8618 and lt8619
completely by myself.


Even though our local drm bridges driver will not be able to enjoy the updates.
We will accept such a results(or pain). I can maintain our local drm bridges
drivers by myself.
What happens if anybody wants to reuse your bridge driver for their
own platform?

Copy and modify.

Linux kernel uses driver model and frameworks to improve code sharing,
not to reduce it.


Well I don't think my patch actually reduce something.
Please see i915, amdgpu, radeon and nouveau.
Non of them use the DRM bridge drivers.
It is just that the various DRM bridge drivers are not suitable to use for my driver.


Sorry, on this technique point, we will not follow your idea.
I'm sure that my approach is toward to right direction for our device at now.
If someone invent a better solution to handle this problem, which make the
various drm bridges drivers usable out of box, then I will follow and cooperate
to test.


Basically duplicating the existing driver code is not really a way to
go. Consider somebody adding a new feature or fixing a bug in your
driver copy. Then they have to check if the fix applies to the driver
at drivers/gpu/drm/bridge/ite-it66121.c. And vice versa. After fixing
an issue in the standard driver one has to keep in mind to check your
private copy.

So, please, use the OF code as an inspiration and register all your
devices in the device tree. Yes, this requires some effort from your
side. Yes, this pays off in the longer distance.

    If
it needs to be changed in any way, please help everyone else by
improving it instead of introducing new driver.

Signed-off-by: Sui Jingfeng <suijingfeng@xxxxxxxxxxx>
---
    drivers/gpu/drm/loongson/Kconfig            |   1 +
    drivers/gpu/drm/loongson/Makefile           |   2 +
    drivers/gpu/drm/loongson/ite_it66121.c      | 749 ++++++++++++++++++++
    drivers/gpu/drm/loongson/ite_it66121.h      |  19 +
    drivers/gpu/drm/loongson/ite_it66121_regs.h | 268 +++++++
    5 files changed, 1039 insertions(+)
    create mode 100644 drivers/gpu/drm/loongson/ite_it66121.c
    create mode 100644 drivers/gpu/drm/loongson/ite_it66121.h
    create mode 100644 drivers/gpu/drm/loongson/ite_it66121_regs.h





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux