drm_atomic_helper_commit_tail_rpm makes it hard for drivers to follow the documented encoder/bridge enable flow, as it commits all CRTC enables before the planes are fully set up, so drivers that can't enable the display link without valid plane setup either need to do the plane setup in the CRTC enable or violate the flow by enabling the display link after the planes have been set up. Neither of those options seem like a good idea. For devices that only do coarse-grained runtime PM for the whole display controller and not per CRTC, like the i.MX LCDIF, we can handle hardware wakeup and suspend in the atomic_commit_tail. Add a commit tail which follows the more conventional atomic commit flow of first diabling any unused CRTCs, setting up all the active plane state, then enable all active display pipes and also handles the device runtime PM at the appropriate times. Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> --- v3: add static qualifier v2: new patch --- drivers/gpu/drm/mxsfb/lcdif_drv.c | 22 +++++++++++++++++++++- drivers/gpu/drm/mxsfb/lcdif_kms.c | 12 ++++++++++-- 2 files changed, 31 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.c b/drivers/gpu/drm/mxsfb/lcdif_drv.c index 38dfd307adc1..9df278adf3e8 100644 --- a/drivers/gpu/drm/mxsfb/lcdif_drv.c +++ b/drivers/gpu/drm/mxsfb/lcdif_drv.c @@ -36,8 +36,28 @@ static const struct drm_mode_config_funcs lcdif_mode_config_funcs = { .atomic_commit = drm_atomic_helper_commit, }; +static void lcdif_commit_tail(struct drm_atomic_state *old_state) +{ + struct drm_device *drm = old_state->dev; + + pm_runtime_get_sync(drm->dev); + + drm_atomic_helper_commit_modeset_disables(drm, old_state); + drm_atomic_helper_commit_planes(drm, old_state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); + drm_atomic_helper_commit_modeset_enables(drm, old_state); + + drm_atomic_helper_fake_vblank(old_state); + drm_atomic_helper_commit_hw_done(old_state); + drm_atomic_helper_wait_for_vblanks(drm, old_state); + + pm_runtime_put(drm->dev); + + drm_atomic_helper_cleanup_planes(drm, old_state); +} + static const struct drm_mode_config_helper_funcs lcdif_mode_config_helpers = { - .atomic_commit_tail = drm_atomic_helper_commit_tail_rpm, + .atomic_commit_tail = lcdif_commit_tail, }; static const struct drm_encoder_funcs lcdif_encoder_funcs = { diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c index d43e3633bce0..1b90014d055a 100644 --- a/drivers/gpu/drm/mxsfb/lcdif_kms.c +++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c @@ -533,7 +533,11 @@ static void lcdif_crtc_atomic_enable(struct drm_crtc *crtc, clk_set_rate(lcdif->clk, m->crtc_clock * 1000); - pm_runtime_get_sync(drm->dev); + /* + * Update the RPM usage count, actual resume already happened in + * lcdif_commit_tail wrapping all the atomic update. + */ + pm_runtime_get_noresume(drm->dev); lcdif_crtc_mode_set_nofb(new_cstate, new_pstate); @@ -574,7 +578,11 @@ static void lcdif_crtc_atomic_disable(struct drm_crtc *crtc, } spin_unlock_irq(&drm->event_lock); - pm_runtime_put_sync(drm->dev); + /* + * Update the RPM usage count, actual suspend happens in + * lcdif_commit_tail wrapping all the atomic update. + */ + pm_runtime_put(drm->dev); } static void lcdif_crtc_atomic_destroy_state(struct drm_crtc *crtc, -- 2.39.2