On 27/07/2023 23:10, Marijn Suijten wrote:
On 2023-07-27 19:21:00, Dmitry Baryshkov wrote:
Inline the _setup_intf_ops() function, it makes it easier to handle
different conditions involving INTF configuration.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 47 +++++++++------------
1 file changed, 21 insertions(+), 26 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index 8ec6505d9e78..7ca772791a73 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -524,31 +524,6 @@ static void dpu_hw_intf_program_intf_cmd_cfg(struct dpu_hw_intf *ctx,
DPU_REG_WRITE(&ctx->hw, INTF_CONFIG2, intf_cfg2);
}
-static void _setup_intf_ops(struct dpu_hw_intf_ops *ops,
- unsigned long cap, const struct dpu_mdss_version *mdss_rev)
-{
- ops->setup_timing_gen = dpu_hw_intf_setup_timing_engine;
- ops->setup_prg_fetch = dpu_hw_intf_setup_prg_fetch;
- ops->get_status = dpu_hw_intf_get_status;
- ops->enable_timing = dpu_hw_intf_enable_timing_engine;
- ops->get_line_count = dpu_hw_intf_get_line_count;
- if (cap & BIT(DPU_INTF_INPUT_CTRL))
- ops->bind_pingpong_blk = dpu_hw_intf_bind_pingpong_blk;
- ops->setup_misr = dpu_hw_intf_setup_misr;
- ops->collect_misr = dpu_hw_intf_collect_misr;
-
- if (cap & BIT(DPU_INTF_TE)) {
- ops->enable_tearcheck = dpu_hw_intf_enable_te;
- ops->disable_tearcheck = dpu_hw_intf_disable_te;
- ops->connect_external_te = dpu_hw_intf_connect_external_te;
- ops->vsync_sel = dpu_hw_intf_vsync_sel;
- ops->disable_autorefresh = dpu_hw_intf_disable_autorefresh;
- }
-
- if (mdss_rev->core_major_ver >= 7)
- ops->program_intf_cmd_cfg = dpu_hw_intf_program_intf_cmd_cfg;
-}
-
struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
void __iomem *addr, const struct dpu_mdss_version *mdss_rev)
{
@@ -571,7 +546,27 @@ struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
*/
c->idx = cfg->id;
c->cap = cfg;
- _setup_intf_ops(&c->ops, c->cap->features, mdss_rev);
+
+ c->ops.setup_timing_gen = dpu_hw_intf_setup_timing_engine;
+ c->ops.setup_prg_fetch = dpu_hw_intf_setup_prg_fetch;
+ c->ops.get_status = dpu_hw_intf_get_status;
+ c->ops.enable_timing = dpu_hw_intf_enable_timing_engine;
+ c->ops.get_line_count = dpu_hw_intf_get_line_count;
+ if (cfg->features & BIT(DPU_INTF_INPUT_CTRL))
+ c->ops.bind_pingpong_blk = dpu_hw_intf_bind_pingpong_blk;
While at it, could we sort these down with the other conditional
callbacks?
What kind of sorting do you have in mind?
+ c->ops.setup_misr = dpu_hw_intf_setup_misr;
+ c->ops.collect_misr = dpu_hw_intf_collect_misr;
+
+ if (cfg->features & BIT(DPU_INTF_TE)) {
Any clue why we're not using test_bit()? Feels a bit inconsistent.
Yes, some files use test_bit(), others just check the bit directly.
Maybe after moving some/most of conditionals to core_major_ver we can
clean that too.
+ c->ops.enable_tearcheck = dpu_hw_intf_enable_te;
+ c->ops.disable_tearcheck = dpu_hw_intf_disable_te;
+ c->ops.connect_external_te = dpu_hw_intf_connect_external_te;
+ c->ops.vsync_sel = dpu_hw_intf_vsync_sel;
+ c->ops.disable_autorefresh = dpu_hw_intf_disable_autorefresh;
+ }
+
+ if (mdss_rev->core_major_ver >= 7)
+ c->ops.program_intf_cmd_cfg = dpu_hw_intf_program_intf_cmd_cfg;
return c;
}
--
2.39.2
--
With best wishes
Dmitry
