On 2023-05-22 23:18:02, Dmitry Baryshkov wrote:
> On 22/05/2023 22:30, Kuogee Hsieh wrote:
> > DSC flush bit is the bit 22 of CTL flush register. BIT(22) is expected
> > to be written to CTL flush register to indicates that DSC is ready for
> > flush. However 0x22 (BIT(1) and BIT(5)) was written mistakenly at current
>
> DSC_IDX is 22, not 0x22.
>
> > implementation. Fix this problem by writing BIT(22) to CTL flush register
> > for DSC to work properly.
Perhaps this whole comment needs a rewrite anyway, instead of pointing
out grammar errors and confusion:
The DSC CTL_FLUSH register should be programmed with the 22th bit
(DSC_IDX) to flush the DSC hardware blocks, not the literal value of
22 (which corresponds to flushing VIG1, VIG2 and RGB1 instead).
Patch contents are good though, thanks!
- Marijn
> > Changes in V12:
> > -- split this patch out of "separate DSC flush update out of interface"
> >
> > Fixes: 77f6da90487c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
> > Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > index 4f7cfa9..69d0ea2 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > @@ -525,7 +525,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
> > DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
> > BIT(cfg->merge_3d - MERGE_3D_0));
> > if (cfg->dsc) {
> > - DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
> > + DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, BIT(DSC_IDX));
> > DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
> > }
> > }
>
> --
> With best wishes
> Dmitry
>
