DSC flush bit is the bit 22 of CTL flush register. BIT(22) is expected
to be written to CTL flush register to indicates that DSC is ready for
flush. However 0x22 (BIT(1) and BIT(5)) was written mistakenly at current
implementation. Fix this problem by writing BIT(22) to CTL flush register
for DSC to work properly.
Changes in V12:
-- split this patch out of "separate DSC flush update out of interface"
Fixes: 77f6da90487c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 4f7cfa9..69d0ea2 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -525,7 +525,7 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
BIT(cfg->merge_3d - MERGE_3D_0));
if (cfg->dsc) {
- DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
+ DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, BIT(DSC_IDX));
DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
}
}
--
2.7.4
