Hi Adam, On Thu, May 18, 2023 at 8:06 PM Adam Ford <aford173@xxxxxxxxx> wrote: > > This series fixes the blanking pack size and the PMS calculation. It then > adds support to allows the DSIM to dynamically DPHY clocks, and support > non-burst mode while allowing the removal of the hard-coded clock values > for the PLL for imx8m mini/nano/plus, and it allows the removal of the > burst-clock device tree entry when burst-mode isn't supported by connected > devices like an HDMI brige. In that event, the HS clock is set to the > value requested by the bridge chip. > > This has been tested on both an i.MX8M Nano and i.MX8M Plus, and should > work on i.MX8M Mini as well. Marek Szyprowski has tested it on various > Exynos boards. > > Adam Ford (5): > drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp] > drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically > drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY > drm: bridge: samsung-dsim: Dynamically configure DPHY timing > drm: bridge: samsung-dsim: Support non-burst mode > > Lucas Stach (1): > drm: bridge: samsung-dsim: fix blanking packet size calculation > > drivers/gpu/drm/bridge/Kconfig | 1 + > drivers/gpu/drm/bridge/samsung-dsim.c | 142 +++++++++++++++++++++----- > include/drm/bridge/samsung-dsim.h | 4 + > 3 files changed, 124 insertions(+), 23 deletions(-) > > V7: Move messages indicating the optional device tree items are going > to be automatically read elsewhere was move to dev_dbg instead of > dev_info. Cleaned up some of the comments to be a bit more clear. > Eliminated a double variable assignement accidentally introduced > in V6 when some of the items were moved from patch 6 to patch 5. It seems you missed addressing one previous comment from Lucas: "Same as with the earlier patch, this needs to be documented in the DT binding by moving "samsung,burst-clock-frequency" to be a optional property."
