Hi Adam, Am Dienstag, 2. Mai 2023, 03:07:52 CEST schrieb Adam Ford: > This series fixes the blanking pack size and the PMS calculation. It then > adds support to allows the DSIM to dynamically DPHY clocks, and support > non-burst mode while allowing the removal of the hard-coded clock values > for the PLL for imx8m mini/nano/plus, and it allows the removal of the > burst-clock device tree entry when burst-mode isn't supported by connected > devices like an HDMI brige. In that event, the HS clock is set to the value > requested by the bridge chip. > > This has been tested on both an i.MX8M Nano and i.MX8M Plus, and should work > on i.MX8M Mini as well. > > Adam Ford (6): > drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp] > drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically > drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY > drm: bridge: samsung-dsim: Dynamically configure DPHY timing > drm: bridge: samsung-dsim: Support non-burst mode > drm: bridge: samsung-dsim: Let blanking calcuation work in non-burst > mode > > Lucas Stach (1): > drm: bridge: samsung-dsim: fix blanking packet size calculation > > drivers/gpu/drm/bridge/Kconfig | 1 + > drivers/gpu/drm/bridge/samsung-dsim.c | 150 ++++++++++++++++++++++---- > include/drm/bridge/samsung-dsim.h | 5 + > 3 files changed, 136 insertions(+), 20 deletions(-) Whole series tested on TQMa8MxML/MBa8Mx using a SN65DSI84 + Tianma TM070JVHG33 display. Tested-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> > --- > V3: When checking if the bust-clock is present, only check for it > in the device tree, and don't check the presence of the > MIPI_DSI_MODE_VIDEO_BURST flag as it breaks an existing Exynos > board. > > Add a new patch to the series to select GENERIC_PHY_MIPI_DPHY in > Kconfig otherwise the build breaks on the 32-bit Exynos. > > Change vco_min variable name to min_freq > > Added tested-by from Chen-Yu Tsai > > V2: Instead of using my packet blanking calculation, this integrates > on from Lucas Stach which gets modified later in the series to > cache the value of the HS-clock instead of having to do the > calucations again. > > Instead of completely eliminating the PLL clock frequency from > the device tree, this makes it optional to avoid breaking some > Samsung devices. When the samsung,pll-clock-frequency is not > found, it reads the value of the clock named "sclk_mipi" > This also maintains backwords compatibility with older device > trees. > > This also changes the DPHY calcuation from a Look-up table, > a reverse engineered algorithm which uses > phy_mipi_dphy_get_default_config to determine the standard > nominal values and calculates the cycles necessary to update > the DPHY timings accordingly. -- TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider http://www.tq-group.com/
