Am Dienstag, 2. Mai 2023, 03:07:55 CEST schrieb Adam Ford:
> Make the pll-clock-frequency optional. If it's present, use it
> to maintain backwards compatibility with existing hardware. If it
> is absent, read clock rate of "sclk_mipi" to determine the rate.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> Tested-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/bridge/samsung-dsim.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c
> b/drivers/gpu/drm/bridge/samsung-dsim.c index bf4b33d2de76..2dc02a9e37c0
> 100644
> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> @@ -1726,12 +1726,20 @@ static int samsung_dsim_parse_dt(struct samsung_dsim
> *dsi) {
> struct device *dev = dsi->dev;
> struct device_node *node = dev->of_node;
> + struct clk *pll_clk;
> int ret;
>
> ret = samsung_dsim_of_read_u32(node, "samsung,pll-clock-frequency",
> &dsi->pll_clk_rate);
> - if (ret < 0)
> - return ret;
> +
> + /* If it doesn't exist, read it from the clock instead of failing */
> + if (ret < 0) {
> + pll_clk = devm_clk_get(dev, "sclk_mipi");
> + if (!IS_ERR(pll_clk))
> + dsi->pll_clk_rate = clk_get_rate(pll_clk);
> + else
> + return PTR_ERR(pll_clk);
> + }
>
Now that 'samsung,pll-clock-frequency' is optional the error in
samsung_dsim_of_read_u32() should be changed. Otherwise you will get
> /soc@0/bus@32c00000/dsi@32e10000: failed to get 'samsung,pll-clock-
frequency' property
Best regards,
Alexander
> ret = samsung_dsim_of_read_u32(node, "samsung,burst-clock-
frequency",
> &dsi->burst_clk_rate);
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
