Document the 'video-mode' property for specifying the DSI video mode and update
the example.
Signed-off-by: Brandon Cheo Fusi <fusibrandon13@xxxxxxxxx>
---
.../bindings/display/bridge/chipone,icn6211.yaml | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
index 5fb54375a..1f9335496 100644
--- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -36,6 +36,16 @@ properties:
enable-gpios:
description: Bridge EN pin, chip is reset when EN is low.
+ video-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2 ]
+ description:
+ DSI video mode.
+ 0 - burst mode
+ 1 - non-burst mode with sync pulse
+ 2 - non-burst mode with sync event.
+ Defaults to 2.
+
vdd1-supply:
description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
@@ -97,7 +107,8 @@ examples:
bridge@0 {
compatible = "chipone,icn6211";
reg = <0>;
- enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+ enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
+ video-mode = <0>;
ports {
#address-cells = <1>;
@@ -107,6 +118,7 @@ examples:
reg = <0>;
bridge_in_dsi: endpoint {
+ data-lanes = <1 2 3 4>;
remote-endpoint = <&dsi_out_bridge>;
};
};
--
2.30.2
