RE: [PATCH] drm/dp_mst: Clear MSG_RDY flag before sending new message

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[Public]

Hi Jani Nikula,

Appreciate your time and feedback! Will adjust the patch.
Some comments inline.

> -----Original Message-----
> From: Jani Nikula <jani.nikula@xxxxxxxxx>
> Sent: Tuesday, April 18, 2023 4:53 PM
> To: Lin, Wayne <Wayne.Lin@xxxxxxx>; dri-devel@xxxxxxxxxxxxxxxxxxxxx;
> amd-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: lyude@xxxxxxxxxx; imre.deak@xxxxxxxxx; ville.syrjala@xxxxxxxxxxxxxxx;
> Wentland, Harry <Harry.Wentland@xxxxxxx>; Zuo, Jerry
> <Jerry.Zuo@xxxxxxx>; Lin, Wayne <Wayne.Lin@xxxxxxx>;
> stable@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] drm/dp_mst: Clear MSG_RDY flag before sending new
> message
> 
> On Tue, 18 Apr 2023, Wayne Lin <Wayne.Lin@xxxxxxx> wrote:
> > [Why & How]
> > The sequence for collecting down_reply/up_request from source
> > perspective should be:
> >
> > Request_n->repeat (get partial reply of Request_n->clear message ready
> > flag to ack DPRX that the message is received) till all partial
> > replies for Request_n are received->new Request_n+1.
> >
> > While assembling partial reply packets, reading out DPCD DOWN_REP
> > Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be
> wrapped
> > up as a complete operation for reading out a reply packet.
> > Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might
> > be risky. e.g. If the reply of the new request has overwritten the
> > DPRX DOWN_REP Sideband MSG buffer before source writing ack to clear
> > DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply
> > for the new request. Should handle the up request in the same way.
> >
> > In drm_dp_mst_hpd_irq(), we don't clear MSG_RDY flag before caliing
> > drm_dp_mst_kick_tx(). Fix that.
> >
> > Signed-off-by: Wayne Lin <Wayne.Lin@xxxxxxx>
> > Cc: stable@xxxxxxxxxxxxxxx
> > ---
> >  .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  2 ++
> > drivers/gpu/drm/display/drm_dp_mst_topology.c | 22
> +++++++++++++++++++
> >  drivers/gpu/drm/i915/display/intel_dp.c       |  3 +++
> >  drivers/gpu/drm/nouveau/dispnv50/disp.c       |  2 ++
> >  4 files changed, 29 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > index 77277d90b6e2..5313a5656598 100644
> > --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> > @@ -3166,6 +3166,8 @@ static void dm_handle_mst_sideband_msg(struct
> amdgpu_dm_connector *aconnector)
> >  			for (retry = 0; retry < 3; retry++) {
> >  				uint8_t wret;
> >
> > +				/* MSG_RDY ack is done in drm*/
> > +				esi[1] &= ~(DP_DOWN_REP_MSG_RDY |
> DP_UP_REQ_MSG_RDY);
> 
> Why do the masking within the retry loop?
> 
> >  				wret = drm_dp_dpcd_write(
> >  					&aconnector->dm_dp_aux.aux,
> >  					dpcd_addr + 1,
> > diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > b/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > index 51a46689cda7..02aad713c67c 100644
> > --- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > +++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
> > @@ -4054,6 +4054,9 @@ int drm_dp_mst_hpd_irq(struct
> > drm_dp_mst_topology_mgr *mgr, u8 *esi, bool *handl  {
> >  	int ret = 0;
> >  	int sc;
> > +	const int tosend = 1;
> > +	int retries = 0;
> > +	u8 buf = 0;
> 
> All of these should be in tighter scope.
> 
> >  	*handled = false;
> >  	sc = DP_GET_SINK_COUNT(esi[0]);
> >
> > @@ -4072,6 +4075,25 @@ int drm_dp_mst_hpd_irq(struct
> drm_dp_mst_topology_mgr *mgr, u8 *esi, bool *handl
> >  		*handled = true;
> >  	}
> >
> > +	if (*handled) {
> 
> That should check for DP_DOWN_REP_MSG_RDY and
> DP_UP_REQ_MSG_RDY only, right? If those are not set, we didn't do
> anything with them, and should not ack.

Right. I was thinking the sink count change will accompany the CSN
up request message. I'll change it to be more clear. Thanks.
> 
> > +		buf = esi[1] & (DP_DOWN_REP_MSG_RDY |
> DP_UP_REQ_MSG_RDY);
> > +		do {
> > +			ret = drm_dp_dpcd_write(mgr->aux,
> > +
> 	DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0,
> > +						&buf,
> > +						tosend);
> 
> We should probably have a helper function to do the acking, similar to
> intel_dp_ack_sink_irq_esi(), which could be used both by this function and
> the drivers.
> 
> > +
> > +			if (ret == tosend)
> > +				break;
> > +
> > +			retries++;
> > +		} while (retries < 5);
> 
> Please don't use a do-while when a for loop is sufficient.
> 
> 	for (tries = 0; tries < 5; tries++)
> 
> and it's obvious at a glance how many times at most this runs. Not so with a
> do-while where you count *re-tries*. Again, would be nice to abstract this
> away in a helper function.
> 
> > +
> > +		if (ret != tosend)
> > +			drm_dbg_kms(mgr->dev, "failed to write dpcd
> 0x%x\n",
> > +				    DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0);
> > +	}
> > +
> >  	drm_dp_mst_kick_tx(mgr);
> >  	return ret;
> >  }
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index bf80f296a8fd..abec3de38b66 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -3939,6 +3939,9 @@ intel_dp_check_mst_status(struct intel_dp
> *intel_dp)
> >  		if (!memchr_inv(ack, 0, sizeof(ack)))
> >  			break;
> >
> > +		/* MSG_RDY ack is done in drm*/
> > +		ack[1] &= ~(DP_DOWN_REP_MSG_RDY |
> DP_UP_REQ_MSG_RDY);
> 
> Above we check if there's anything to ack and bail out, and now this clears
> the bits but writes them anyway.
> 
> I think the handled parameter was problematic before, but now it's even
> more convoluted. What does it indicate? It used to mean you need to ack if
> it's set, but now it's something different. This function is getting very difficult
> to use correctly.

My plan was to ack message events within drm_dp_mst_hpd_irq() since the
events are handled there. There are still CP_IRQ and LINK_STATUS_CHANGED
events above get handled in intel_dp_check_mst_status(), so I intended to
mask DP_DOWN_REP_MSG_RDY/DP_UP_REQ_MSG_RDY, and ack
CP_IRQ/LINK_STATUS_CHANGED here.
> 
> BR,
> Jani.
> 
> 
> 
> > +
> >  		if (!intel_dp_ack_sink_irq_esi(intel_dp, ack))
> >  			drm_dbg_kms(&i915->drm, "Failed to ack ESI\n");
> >  	}
> > diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > b/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > index edcb2529b402..e905987104ed 100644
> > --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
> > @@ -1336,6 +1336,8 @@ nv50_mstm_service(struct nouveau_drm *drm,
> >  		if (!handled)
> >  			break;
> >
> > +		/* MSG_RDY ack is done in drm*/
> > +		esi[1] &= ~(DP_DOWN_REP_MSG_RDY |
> DP_UP_REQ_MSG_RDY);
> >  		rc = drm_dp_dpcd_write(aux, DP_SINK_COUNT_ESI + 1,
> &esi[1],
> >  				       3);
> 
> Same here, this acks even if it's already been acked.
> 
> >  		if (rc != 3) {
> 
> --
> Jani Nikula, Intel Open Source Graphics Center

--
Regards,
Wayne Lin




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux