Re: [PATCH v7 09/12] arm64: dts: rockchip: a64: Add endpoint@0 to dsi_in_tcon0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 29, 2023 at 8:32 PM Maxime Ripard <maxime@xxxxxxxxxx> wrote:
>
> The commit title is wrong, it's not a rockchip device.

Thanks for the note, I will fix it in the next version.

>
> On Wed, Mar 29, 2023 at 06:46:15PM +0530, Jagan Teki wrote:
> > The DSI downstream devices are likely to be Panel, Bridge and
> > I2C-Configured Bridge.
> >
> > It is possible to connect all three devices using upstream OF-graph port
> > or ports node however only Panel and Bridge are possible to connect via
> > child node but not possible to connect I2C-Configured Bridge via child
> > node since I2C-Configure bridges are child of I2C not upstream DSI hosts
> > and it must represent them via port or ports with endpoint linking.
> >
> > Allwinner A64 DSI node already has a port so add endpoint 0 for input
> > tcon so that the downstream DSI devices can use endpoint 1 to connect
> > Panel or Bridge or I2C-Configured Bridge.
> >
> > An example of the I2C-Configured downstream bridge representation is,
> >
> > i2c1 {
> >        bridge@1b {
> >            compatible = "ti,dlpc3433";
> >
> >              ports {
> >                   port@0 {
> >                          reg = <0>;
> >
> >                          bridge_in_dsi: endpoint {
> >                                 remote-endpoint = <&dsi_out_bridge>;
> >                                 data-lanes = <1 2 3 4>;
> >                          };
> >                   };
> >
> >                 port@2 {
> >                        reg = <2>;
> >
> >                          bridge_out_dmd: endpoint {
> >                                 remote-endpoint = <&dmd_out_bridge>;
> >                          };
> >                   };
> >              };
> >        };
> > };
> >
> > dsi {
> >        compatible = "allwinner,sun50i-a64-mipi-dsi";
> >
> >        port {
> >              dsi_in_tcon0: endpoint@0 {
> >                 reg = <0>;
> >                 remote-endpoint = <tcon0_out_dsi>;
> >            };
> >
> >            dsi_out_bridge: endpoint@1 {
> >                 reg = <1>;
> >                 remote-endpoint = <&bridge_in_dsi>;
> >            };
> >       };
> > };
> >
> > Note that existing device bindings are untouched and still represent
> > the downstream devices via child nodes since the sun6i-mipi-dsi host
> > will migrate to a standardized single helper to lookup for a
> > downstream device via child or OF-graph port or port node.
> >
> > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> > ---
> > Changes for v7:
> > - new patch
> >
> >  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 6 +++++-
> >  1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > index 77b5349f6087..3ed566dc2172 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > @@ -1189,7 +1189,11 @@ dsi: dsi@1ca0000 {
> >                       #size-cells = <0>;
> >
> >                       port {
> > -                             dsi_in_tcon0: endpoint {
> > +                             #address-cells = <1>;
> > +                             #size-cells = <0>;
> > +
> > +                             dsi_in_tcon0: endpoint@0 {
> > +                                     reg = <0>;
> >                                       remote-endpoint = <&tcon0_out_dsi>;
> >                               };
>
> That doesn't match the DT binding anymore, and why can't we add endpoint@1 there too?

Do you mean add endpoint@1 without any remote-endpoint like this?

dsi_out_bridge: endpoint@1 {
         reg = <1>;
};

I was supposed to add this, since dtbs_check doesn't give any error. I
have skipped this, as I thought it wouldn't be needed.

Thanks,
agan.




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux