The DSI downstream devices are likely to be Panel, Bridge and I2C-Configured Bridge. It is possible to connect all three devices using upstream OF-graph port or ports node however only Panel and Bridge are possible to connect via child node but not possible to connect I2C-Configured Bridge via child node since I2C-Configure bridges are child of I2C not upstream DSI hosts and it must represent them via port or ports with endpoint linking. Allwinner A64 DSI node already has a port so add endpoint 0 for input tcon so that the downstream DSI devices can use endpoint 1 to connect Panel or Bridge or I2C-Configured Bridge. An example of the I2C-Configured downstream bridge representation is, i2c1 { bridge@1b { compatible = "ti,dlpc3433"; ports { port@0 { reg = <0>; bridge_in_dsi: endpoint { remote-endpoint = <&dsi_out_bridge>; data-lanes = <1 2 3 4>; }; }; port@2 { reg = <2>; bridge_out_dmd: endpoint { remote-endpoint = <&dmd_out_bridge>; }; }; }; }; }; dsi { compatible = "allwinner,sun50i-a64-mipi-dsi"; port { dsi_in_tcon0: endpoint@0 { reg = <0>; remote-endpoint = <tcon0_out_dsi>; }; dsi_out_bridge: endpoint@1 { reg = <1>; remote-endpoint = <&bridge_in_dsi>; }; }; }; Note that existing device bindings are untouched and still represent the downstream devices via child nodes since the sun6i-mipi-dsi host will migrate to a standardized single helper to lookup for a downstream device via child or OF-graph port or port node. Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> --- Changes for v7: - new patch arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 77b5349f6087..3ed566dc2172 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -1189,7 +1189,11 @@ dsi: dsi@1ca0000 { #size-cells = <0>; port { - dsi_in_tcon0: endpoint { + #address-cells = <1>; + #size-cells = <0>; + + dsi_in_tcon0: endpoint@0 { + reg = <0>; remote-endpoint = <&tcon0_out_dsi>; }; }; -- 2.25.1