The runtime PM status can only be updated while runtime PM is disabled.
Drop the bogus pm_runtime_set_active() call that was made after enabling
runtime PM and which (incidentally but correctly) left the runtime PM
status set to 'suspended'.
Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware")
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
drivers/gpu/drm/msm/adreno/adreno_device.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c
index c5c4c93b3689..cd009d56d35d 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_device.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_device.c
@@ -438,9 +438,6 @@ struct msm_gpu *adreno_load_gpu(struct drm_device *dev)
*/
pm_runtime_enable(&pdev->dev);
- /* Make sure pm runtime is active and reset any previous errors */
- pm_runtime_set_active(&pdev->dev);
-
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0) {
pm_runtime_put_sync(&pdev->dev);
--
2.39.2
