There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use
that instead and delete the custom DSI write macro defined in the driver.
Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-novatek-nt35950.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35950.c b/drivers/gpu/drm/panel/panel-novatek-nt35950.c
index 3a844917da07..abf752b36a52 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt35950.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt35950.c
@@ -89,14 +89,6 @@ static inline struct nt35950 *to_nt35950(struct drm_panel *panel)
return container_of(panel, struct nt35950, panel);
}
-#define dsi_dcs_write_seq(dsi, seq...) do { \
- static const u8 d[] = { seq }; \
- int ret; \
- ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \
- if (ret < 0) \
- return ret; \
- } while (0)
-
static void nt35950_reset(struct nt35950 *nt)
{
gpiod_set_value_cansleep(nt->reset_gpio, 1);
@@ -338,7 +330,7 @@ static int nt35950_on(struct nt35950 *nt)
return ret;
/* Unknown command */
- dsi_dcs_write_seq(dsi, 0xd4, 0x88, 0x88);
+ mipi_dsi_dcs_write_seq(dsi, 0xd4, 0x88, 0x88);
/* CMD2 Page 7 */
ret = nt35950_set_cmd2_page(nt, 7);
@@ -346,10 +338,10 @@ static int nt35950_on(struct nt35950 *nt)
return ret;
/* Enable SubPixel Rendering */
- dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_EN, 0x01);
+ mipi_dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_EN, 0x01);
/* SPR Mode: YYG Rainbow-RGB */
- dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_MODE, MCS_SPR_MODE_YYG_RAINBOW_RGB);
+ mipi_dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_MODE, MCS_SPR_MODE_YYG_RAINBOW_RGB);
/* CMD3 */
ret = nt35950_inject_black_image(nt);
--
2.38.1
