There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx> --- drivers/gpu/drm/panel/panel-samsung-sofef00.c | 24 +++++++------------ 1 file changed, 8 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/panel/panel-samsung-sofef00.c b/drivers/gpu/drm/panel/panel-samsung-sofef00.c index 1a0d24595faa..9db49a028930 100644 --- a/drivers/gpu/drm/panel/panel-samsung-sofef00.c +++ b/drivers/gpu/drm/panel/panel-samsung-sofef00.c @@ -34,14 +34,6 @@ struct sofef00_panel *to_sofef00_panel(struct drm_panel *panel) return container_of(panel, struct sofef00_panel, panel); } -#define dsi_dcs_write_seq(dsi, seq...) do { \ - static const u8 d[] = { seq }; \ - int ret; \ - ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ - if (ret < 0) \ - return ret; \ - } while (0) - static void sofef00_panel_reset(struct sofef00_panel *ctx) { gpiod_set_value_cansleep(ctx->reset_gpio, 0); @@ -67,7 +59,7 @@ static int sofef00_panel_on(struct sofef00_panel *ctx) } usleep_range(10000, 11000); - dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); if (ret < 0) { @@ -75,13 +67,13 @@ static int sofef00_panel_on(struct sofef00_panel *ctx) return ret; } - dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); - dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); - dsi_dcs_write_seq(dsi, 0xb0, 0x07); - dsi_dcs_write_seq(dsi, 0xb6, 0x12); - dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); - dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20); - dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00); + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); + mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x07); + mipi_dsi_dcs_write_seq(dsi, 0xb6, 0x12); + mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20); + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00); ret = mipi_dsi_dcs_set_display_on(dsi); if (ret < 0) { -- 2.38.1