It takes some time until the enable GPIO has settled when turning on.
This delay is platform specific and may be caused by e.g. voltage
shifts, capacitors etc.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index 48a97bb3e2e0d..3f50d497cf8ac 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -32,6 +32,10 @@ properties:
maxItems: 1
description: GPIO specifier for bridge_en pin (active high).
+ ti,enable-delay-us:
+ default: 10000
+ description: Enable time delay for enable-gpios
+
vcc-supply:
description: A 1.8V power supply (see regulator/regulator.yaml).
--
2.34.1
