On Tue, Oct 25, 2022 at 08:26:24PM -0700, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
>
> The SA8295P ADP has, among other interfaces, six MiniDP connectors which
> are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
>
> Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
> DP PHYs and link them all together.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
> &apps_rsc {
> @@ -156,13 +240,169 @@ vreg_l7g: ldo7 {
>
> vreg_l8g: ldo8 {
> regulator-name = "vreg_l8g";
> - regulator-min-microvolt = <880000>;
> - regulator-max-microvolt = <880000>;
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
Did you really intend to allow set-load here?
I'm guessing this wasn't the case, but otherwise you also need to
specify the valid modes.
> + };
> +
> + vreg_l11g: ldo11 {
> + regulator-name = "vreg_l11g";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> };
> };
> };
> +&mdss0_dp2_phy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l8g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +};
Johan
