drm_dsc_config's bits_per_pixel field holds a fractional value with 4
bits, which all panel drivers should adhere to for
drm_dsc_pps_payload_pack() to generate a valid payload. All code in the
DSI driver here seems to assume that this field doesn't contain any
fractional bits, hence resulting in the wrong values being computed.
Since none of the calculations leave any room for fractional bits or
seem to indicate any possible area of support, disallow such values
altogether.
Fixes: b9080324d6ca ("drm/msm/dsi: add support for dsc data")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/dsi/dsi_host.c | 34 +++++++++++++++++++++++-------
1 file changed, 26 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index cb6f2fa11f58..42a5c9776f52 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -847,6 +847,11 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
u32 pkt_per_line;
u32 bytes_in_slice;
u32 eol_byte_num;
+ int bpp = dsc->bits_per_pixel >> 4;
+
+ if (dsc->bits_per_pixel & 0xf)
+ /* dsi_populate_dsc_params() already caught this case */
+ pr_err("DSI does not support fractional bits_per_pixel\n");
/* first calculate dsc parameters and then program
* compress mode registers
@@ -860,7 +865,7 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
if (slice_per_intf > dsc->slice_count)
dsc->slice_count = 1;
- bytes_in_slice = DIV_ROUND_UP(dsc->slice_width * dsc->bits_per_pixel, 8);
+ bytes_in_slice = DIV_ROUND_UP(dsc->slice_width * bpp, 8);
dsc->slice_chunk_size = bytes_in_slice;
@@ -913,6 +918,7 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
u32 va_end = va_start + mode->vdisplay;
u32 hdisplay = mode->hdisplay;
u32 wc;
+ int ret;
DBG("");
@@ -948,7 +954,9 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
/* we do the calculations for dsc parameters here so that
* panel can use these parameters
*/
- dsi_populate_dsc_params(dsc);
+ ret = dsi_populate_dsc_params(dsc);
+ if (ret)
+ return;
/* Divide the display by 3 but keep back/font porch and
* pulse width same
@@ -1229,6 +1237,10 @@ static int dsi_cmd_dma_add(struct msm_dsi_host *msm_host,
if (packet.size < len)
memset(data + packet.size, 0xff, len - packet.size);
+ if (msg->type == MIPI_DSI_PICTURE_PARAMETER_SET)
+ print_hex_dump(KERN_DEBUG, "ALL:", DUMP_PREFIX_NONE,
+ 16, 1, data, len, false);
+
if (cfg_hnd->ops->tx_buf_put)
cfg_hnd->ops->tx_buf_put(msm_host);
@@ -1786,6 +1798,12 @@ static int dsi_populate_dsc_params(struct drm_dsc_config *dsc)
int data;
int final_value, final_scale;
int i;
+ int bpp = dsc->bits_per_pixel >> 4;
+
+ if (dsc->bits_per_pixel & 0xf) {
+ pr_err("DSI does not support fractional bits_per_pixel\n");
+ return -EINVAL;
+ }
dsc->rc_model_size = 8192;
dsc->first_line_bpg_offset = 12;
@@ -1807,7 +1825,7 @@ static int dsi_populate_dsc_params(struct drm_dsc_config *dsc)
}
dsc->initial_offset = 6144; /* Not bpp 12 */
- if (dsc->bits_per_pixel != 8)
+ if (bpp != 8)
dsc->initial_offset = 2048; /* bpp = 12 */
mux_words_size = 48; /* bpc == 8/10 */
@@ -1830,16 +1848,16 @@ static int dsi_populate_dsc_params(struct drm_dsc_config *dsc)
* params are calculated
*/
groups_per_line = DIV_ROUND_UP(dsc->slice_width, 3);
- dsc->slice_chunk_size = dsc->slice_width * dsc->bits_per_pixel / 8;
- if ((dsc->slice_width * dsc->bits_per_pixel) % 8)
+ dsc->slice_chunk_size = dsc->slice_width * bpp / 8;
+ if ((dsc->slice_width * bpp) % 8)
dsc->slice_chunk_size++;
/* rbs-min */
min_rate_buffer_size = dsc->rc_model_size - dsc->initial_offset +
- dsc->initial_xmit_delay * dsc->bits_per_pixel +
+ dsc->initial_xmit_delay * bpp +
groups_per_line * dsc->first_line_bpg_offset;
- hrd_delay = DIV_ROUND_UP(min_rate_buffer_size, dsc->bits_per_pixel);
+ hrd_delay = DIV_ROUND_UP(min_rate_buffer_size, bpp);
dsc->initial_dec_delay = hrd_delay - dsc->initial_xmit_delay;
@@ -1862,7 +1880,7 @@ static int dsi_populate_dsc_params(struct drm_dsc_config *dsc)
data = 2048 * (dsc->rc_model_size - dsc->initial_offset + num_extra_mux_bits);
dsc->slice_bpg_offset = DIV_ROUND_UP(data, groups_total);
- target_bpp_x16 = dsc->bits_per_pixel * 16;
+ target_bpp_x16 = bpp * 16;
data = (dsc->initial_xmit_delay * target_bpp_x16) / 16;
final_value = dsc->rc_model_size - data + num_extra_mux_bits;
--
2.37.3
