Hi, Xinlei:
On Mon, 2022-09-05 at 21:34 +0800, xinlei.lee@xxxxxxxxxxxx wrote:
> From: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
>
> Dpi output needs to adjust the output format to dual edge for MT8186.
Separate this patch into two patches. One is adding edge_cfg_in_mmsys,
and another one is adding mt8186 dpi support.
I think the default value in mmsys (single edge) should work for some
display so that mmsys hardware use single edge for default value. So I
need you to describe more information why we need dual edge.
>
> Co-developed-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> Signed-off-by: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@xxxxxxxxxxxxx>
> Reviewed-by: Nílas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 31
> +++++++++++++++++++++++++
> drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 5 ++++
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 ++
> 3 files changed, 38 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 630a4e301ef6..ffe4a4b70a0f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -15,6 +15,7 @@
> #include <linux/of_graph.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> +#include <linux/soc/mediatek/mtk-mmsys.h>
> #include <linux/types.h>
>
> #include <video/videomode.h>
> @@ -30,6 +31,7 @@
> #include "mtk_disp_drv.h"
> #include "mtk_dpi_regs.h"
> #include "mtk_drm_ddp_comp.h"
> +#include "mtk_drm_drv.h"
>
> enum mtk_dpi_out_bit_num {
> MTK_DPI_OUT_BIT_NUM_8BITS,
> @@ -82,6 +84,7 @@ struct mtk_dpi {
> struct pinctrl_state *pins_dpi;
> u32 output_fmt;
> int refcount;
> + struct device *mmsys_dev;
> };
>
> static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
> @@ -135,6 +138,7 @@ struct mtk_dpi_yc_limit {
> * @yuv422_en_bit: Enable bit of yuv422.
> * @csc_enable_bit: Enable bit of CSC.
> * @pixels_per_iter: Quantity of transferred pixels per iteration.
> + * @edge_cfg_in_mmsys: If the edge configuration for DPI's output
> needs to be set in MMSYS.
> */
> struct mtk_dpi_conf {
> unsigned int (*cal_factor)(int clock);
> @@ -153,6 +157,7 @@ struct mtk_dpi_conf {
> u32 yuv422_en_bit;
> u32 csc_enable_bit;
> u32 pixels_per_iter;
> + bool edge_cfg_in_mmsys;
> };
>
> static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val,
> u32 mask)
> @@ -449,6 +454,9 @@ static void mtk_dpi_dual_edge(struct mtk_dpi
> *dpi)
> mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING,
> dpi->output_fmt ==
> MEDIA_BUS_FMT_RGB888_2X12_LE ?
> EDGE_SEL : 0, EDGE_SEL);
> + if (dpi->conf->edge_cfg_in_mmsys)
> + mtk_mmsys_ddp_dpi_fmt_config(dpi->mmsys_dev,
> DPI_RGB888_DDR_CON,
> + DPI_FORMAT_MASK);
> } else {
> mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE,
> 0);
> }
> @@ -778,8 +786,10 @@ static int mtk_dpi_bind(struct device *dev,
> struct device *master, void *data)
> {
> struct mtk_dpi *dpi = dev_get_drvdata(dev);
> struct drm_device *drm_dev = data;
> + struct mtk_drm_private *priv = drm_dev->dev_private;
> int ret;
>
> + dpi->mmsys_dev = priv->mmsys_dev;
> ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
> DRM_MODE_ENCODER_TMDS);
> if (ret) {
> @@ -930,6 +940,24 @@ static const struct mtk_dpi_conf mt8183_conf = {
> .csc_enable_bit = CSC_ENABLE,
> };
>
> +static const struct mtk_dpi_conf mt8186_conf = {
> + .cal_factor = mt8183_calculate_factor,
> + .reg_h_fre_con = 0xe0,
> + .max_clock_khz = 150000,
> + .output_fmts = mt8183_output_fmts,
> + .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> + .edge_cfg_in_mmsys = true,
> + .pixels_per_iter = 1,
> + .is_ck_de_pol = true,
> + .swap_input_support = true,
> + .support_direct_pin = true,
> + .dimension_mask = HPW_MASK,
> + .hvsize_mask = HSIZE_MASK,
> + .channel_swap_shift = CH_SWAP,
> + .yuv422_en_bit = YUV422_EN,
> + .csc_enable_bit = CSC_ENABLE,
> +};
> +
> static const struct mtk_dpi_conf mt8192_conf = {
> .cal_factor = mt8183_calculate_factor,
> .reg_h_fre_con = 0xe0,
> @@ -1080,6 +1108,9 @@ static const struct of_device_id
> mtk_dpi_of_ids[] = {
> { .compatible = "mediatek,mt8183-dpi",
> .data = &mt8183_conf,
> },
> + { .compatible = "mediatek,mt8186-dpi",
> + .data = &mt8186_conf,
> + },
> { .compatible = "mediatek,mt8192-dpi",
> .data = &mt8192_conf,
> },
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> index 62bd4931b344..779e868ffb1a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> @@ -235,4 +235,9 @@
> #define MATRIX_SEL_RGB_TO_JPEG 0
> #define MATRIX_SEL_RGB_TO_BT601 2
>
> +/* Values for DPI configuration in MMSYS address space */
> +#define DPI_FORMAT_MASK 0x1
> +#define DPI_RGB888_DDR_CON BIT(0)
> +#define DPI_RGB565_SDR_CON BIT(1)
This is the mmsys register definition, so move these to mmsys driver.
Regards,
CK
> +
> #endif /* __MTK_DPI_REGS_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 5f02f8d0e4fc..28eb1ac91c15 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -631,6 +631,8 @@ static const struct of_device_id
> mtk_ddp_comp_dt_ids[] = {
> .data = (void *)MTK_DPI },
> { .compatible = "mediatek,mt8183-dpi",
> .data = (void *)MTK_DPI },
> + { .compatible = "mediatek,mt8186-dpi",
> + .data = (void *)MTK_DPI },
> { .compatible = "mediatek,mt8192-dpi",
> .data = (void *)MTK_DPI },
> { .compatible = "mediatek,mt8195-dp-intf",
> --
> 2.18.0
>
