Hi Nicolas,
Thanks for the review.
On Thu, 2022-08-18 at 17:47 -0400, Nícolas F. R. A. Prado wrote:
> Hi Nancy,
>
> On Mon, Jul 11, 2022 at 03:52:42PM +0800, Nancy.Lin wrote:
> [..]
> > static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data
> > = {
> > .clk_driver = "clk-mt2701-mm",
> > .routes = mmsys_default_routing_table,
> > @@ -86,6 +88,7 @@ static const struct mtk_mmsys_driver_data
> > mt8173_mmsys_driver_data = {
> > .routes = mmsys_default_routing_table,
> > .num_routes = ARRAY_SIZE(mmsys_default_routing_table),
> > .sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> > + .num_resets = 32,
> > };
> >
> > static const struct mtk_mmsys_match_data mt8173_mmsys_match_data =
> > {
> > @@ -100,6 +103,7 @@ static const struct mtk_mmsys_driver_data
> > mt8183_mmsys_driver_data = {
> > .routes = mmsys_mt8183_routing_table,
> > .num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
> > .sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> > + .num_resets = 32,
> > };
> >
> > static const struct mtk_mmsys_match_data mt8183_mmsys_match_data =
> > {
> > @@ -114,6 +118,7 @@ static const struct mtk_mmsys_driver_data
> > mt8186_mmsys_driver_data = {
> > .routes = mmsys_mt8186_routing_table,
> > .num_routes = ARRAY_SIZE(mmsys_mt8186_routing_table),
> > .sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
> > + .num_resets = 32,
> > };
>
> [..]
> > @@ -351,18 +362,6 @@ static int mtk_mmsys_probe(struct
> > platform_device *pdev)
> > return ret;
> > }
> >
> > - spin_lock_init(&mmsys->lock);
> > -
> > - mmsys->rcdev.owner = THIS_MODULE;
> > - mmsys->rcdev.nr_resets = 32;
>
> The number of resets was previously always set to 32, and now you're
> instead
> setting it based on num_resets from each machine. The issue is,
> you're
> forgetting a bunch of them.
>
> mt8192 didn't get a num_reset, so this commit breaks the display on
> mt8192 based
> devices. But mt8192 isn't the only one, there are other platforms
> missing this
> property. Please set num_resets to 32 in every single one of them,
> otherwise
> there will be display regressions.
>
> Thanks,
> Nícolas
It's my mistake. I will set num_resets to 32 for every mmsys driver.
Thanks,
Nancy
