Hi, Bo-Chen:
On Fri, 2022-07-01 at 14:28 +0800, Bo-Chen Chen wrote:
> From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
>
> This patch adds a embedded displayport driver for the MediaTek mt8195
> SoC.
>
> It supports the MT8195, the embedded DisplayPort units. It offers
> DisplayPort 1.4 with up to 4 lanes.
>
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so
> that
> both can work with the same register range. The phy driver sets
> device
> data that is read by the parent to get the phy device that can be
> used
> to control the phy properties.
>
> This driver is based on an initial version by
> Jitao shi <jitao.shi@xxxxxxxxxxxx>
>
> Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
> ---
[snip]
> +
> +static irqreturn_t mtk_dp_hpd_event_thread(int hpd, void *dev)
> +{
> + struct mtk_dp *mtk_dp = dev;
> + u8 buf[DP_RECEIVER_CAP_SIZE] = {};
> +
> + if (mtk_dp->train_info.cable_state_change) {
> + mtk_dp->train_info.cable_state_change = false;
> +
> + mtk_dp_update_bits(mtk_dp, MTK_DP_TOP_PWR_STATE,
> + DP_PWR_STATE_BANDGAP_TPLL_LANE,
> + DP_PWR_STATE_MASK);
> + drm_dp_read_dpcd_caps(&mtk_dp->aux, buf);
Why do you read dpcd caps into 'buf'. 'buf' is not used elsewhere.
Regards,
CK
> + }
> +
> + if (mtk_dp->train_info.irq_sta.hpd_inerrupt) {
> + dev_dbg(mtk_dp->dev, "MTK_DP_HPD_INTERRUPT\n");
> + mtk_dp->train_info.irq_sta.hpd_inerrupt = false;
> + mtk_dp_hpd_sink_event(mtk_dp);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
