Hi Marco, Am Montag, 30. Mai 2022, 17:05:48 CEST schrieb Marco Felsch: > The bridge device can now also be enabled/disabled by an external reset > controller. So the device now supports either enable/disable by simple > GPIO or by an Reset-Controller. > > Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx> > --- > .../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml > b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml index > 7306b9874dc3..eff8360c184e 100644 > --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml > @@ -35,6 +35,12 @@ properties: > vcc-supply: > description: A 1.8V power supply (see regulator/regulator.yaml). > > + resets: > + maxItems: 1 > + description: | > + Reset specifier for bridge_en pin. This is required only if the > brdige_en + pin is connected to a reset controller. > + > ports: > $ref: /schemas/graph.yaml#/properties/ports Maybe it should be added here, that 'resets' is an alternative to 'enable- gpios' as both are essentially controlling the same pin from the bridge. Best regards Alexander
