The bridge device can now also be enabled/disabled by an external reset
controller. So the device now supports either enable/disable by simple
GPIO or by an Reset-Controller.
Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index 7306b9874dc3..eff8360c184e 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -35,6 +35,12 @@ properties:
vcc-supply:
description: A 1.8V power supply (see regulator/regulator.yaml).
+ resets:
+ maxItems: 1
+ description: |
+ Reset specifier for bridge_en pin. This is required only if the brdige_en
+ pin is connected to a reset controller.
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
--
2.30.2
