HI Greg, Em Fri, 29 Apr 2022 10:30:33 +0200 Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> escreveu: > On Fri, Apr 29, 2022 at 09:07:57AM +0100, Mauro Carvalho Chehab wrote: > > Hi Daniel, > > > > Em Fri, 29 Apr 2022 09:54:10 +0200 > > Daniel Vetter <daniel@xxxxxxxx> escreveu: > > > > > On Fri, Apr 29, 2022 at 07:31:15AM +0100, Mauro Carvalho Chehab wrote: > > > > Sometimes, device drivers are bound using indirect references, > > > > which is not visible when looking at /proc/modules or lsmod. > > > > > > > > Add a function to allow setting up module references for such > > > > cases. > > > > > > > > Reviewed-by: Dan Williams <dan.j.williams@xxxxxxxxx> > > > > Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> > > > > > > This sounds like duct tape at the wrong level. We should have a > > > device_link connecting these devices, and maybe device_link internally > > > needs to make sure the respective driver modules stay around for long > > > enough too. But open-coding this all over the place into every driver that > > > has some kind of cross-driver dependency sounds terrible. > > > > > > Or maybe the bug is that the snd driver keeps accessing the hw/component > > > side when that is just plain gone. Iirc there's still fundamental issues > > > there on the sound side of things, which have been attempted to paper over > > > by timeouts and stuff like that in the past instead of enforcing a hard > > > link between the snd and i915 side. > > > > I agree with you that the device link between snd-hda and the DRM driver > > should properly handle unbinding on both directions. This is something > > that require further discussions with ALSA and DRM people, and we should > > keep working on it. > > > > Yet, the binding between those drivers do exist, but, despite other > > similar inter-driver bindings being properly reported by lsmod, this one > > is invisible for userspace. > > > > What this series does is to make such binding visible. As simple as that. > > It also increases the reference count, and creates a user/kernel api > with the symlinks, right? Will the reference count increase prevent the > modules from now being unloadable? > > This feels like a very "weak" link between modules that should not be > needed if reference counting is implemented properly (so that things are > cleaned up in the correct order.) The refcount increment exists even without this patch, as hda_component_master_bind() at sound/hda/hdac_component.c uses try_module_get() when it creates the device link. This series won't change anything with that regards. The only difference is that it will now properly report userspace that snd-hda will be using something inside the DRM driver (basically, it uses the DRM driver to power-control the HDA hardware on modern CPU/GPUs). - Btw, this is not the only case where userspace invisible bindings between two driver happen within the Kernel. On media, DVB drivers attach the frontend/tuner drivers using I2C bus on a way where lsmod doesn't current report any dependencies. See, for instance, PCTV 290e driver (partial) dependency chain: $ lsmod Module Size Used by rc_pinnacle_pctv_hd 16384 0 em28xx_rc 20480 0 tda18271 53248 1 cxd2820r 45056 1 em28xx_dvb 36864 0 dvb_core 155648 2 cxd2820r,em28xx_dvb em28xx 106496 2 em28xx_rc,em28xx_dvb tveeprom 28672 1 em28xx videobuf2_vmalloc 20480 1 uvcvideo videobuf2_memops 20480 1 videobuf2_vmalloc videobuf2_common 69632 4 videobuf2_vmalloc,videobuf2_v4l2,uvcvideo,videobuf2_memops videodev 266240 4 videobuf2_v4l2,uvcvideo,videobuf2_common,em28xx mc 65536 6 videodev,videobuf2_v4l2,uvcvideo,dvb_core,videobuf2_common,em28xx In the above example, tda18271 is an I2C tuner driver which talks to the hardware via the I2C bus registered by the em28xx driver. It is loaded during em28xx probing time. Again, lsmod doesn't show such dependencies. One can't remove the tuner driver without first removing the em28xx driver, which is the one that increments its refcount. - Back to the snd-hda issue, the problem is not with refcount. It is, instead, to provide a way for userspace to know what's the correct order to remove/unbind modules. Regards, Mauro
