Re: [PATCH v17 6/6] drm/bridge: display-connector: add ddc-en gpio support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

> Am 07.04.2022 um 09:30 schrieb Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>:
> 
> Hi Nikolaus,
> 
> Thank you for the patch.
> 
> On Wed, Apr 06, 2022 at 06:26:08PM +0200, H. Nikolaus Schaller wrote:
>> "hdmi-connector.yaml" bindings defines an optional property
>> "ddc-en-gpios" for a single gpio to enable DDC operation.
>> 
>> Usually this controls +5V power on the HDMI connector.
>> This +5V may also be needed for HPD.
>> 
>> This was not reflected in code but is needed to make the CI20
>> board work.
>> 
>> Now, the driver activates the ddc gpio after probe and
>> deactivates after remove so it is "almost on".
>> 
>> But only if this driver is loaded (and not e.g. blacklisted
>> as module).
>> 
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

Added to v18 (which is needed to remove some now redundant patches
and fix a detail in the ingenic-drm driver).

BR and thanks for review,
Nikolaus





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux