Re: [Intel-gfx] [PATCH 2/2] drm/i915: Add DSC support to MST path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 17, 2022 at 06:33:53PM +0200, Stanislav Lisovskiy wrote:
> Whenever we are not able to get enough timeslots
> for required PBN, let's try to allocate those
> using DSC, just same way as we do for SST.
> 
> Those patches are experimental yet, i.e not
> for merging, still need to be tested with
> proper DSC display, submitting those to check
> ig nothing else blows up at least.
> 
> v2: Add DSC checks to intel_dp_mst_mode_valid_ctx, similar
>     to ones we have in intel_dp_mode_valid(Manasi Navare)
> 
> v3: Removed redundant edp condition logic from MST DSC
>     handling(Manasi Navare)
> 
> v4:  - Fixed forgotten force_dsc_en condition which was
>        always enabled for testing purposes(Manasi Navare)
>      - Properly process ret == EDEADLK, thus fixing the
>        regression caused by WARN triggered with modeset_lock.
> 
> v5:  - Removed redundant check(Imre Deak)
> 
> Acked-by: Imre Deak <imre.deak@xxxxxxxxx>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c     | 138 ++++++++++++++++--
>  drivers/gpu/drm/i915/display/intel_dp.h     |  17 +++
>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 146 +++++++++++++++++++-
>  3 files changed, 285 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 9e19165fd175..b04771e495cc 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -115,7 +115,6 @@ bool intel_dp_is_edp(struct intel_dp *intel_dp)
>  }
>  
>  static void intel_dp_unset_edid(struct intel_dp *intel_dp);
> -static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc);
>  
>  /* Is link rate UHBR and thus 128b/132b? */
>  bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state)
> @@ -667,11 +666,12 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
>  		return 6144 * 8;
>  }
>  
> -static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> -				       u32 link_clock, u32 lane_count,
> -				       u32 mode_clock, u32 mode_hdisplay,
> -				       bool bigjoiner,
> -				       u32 pipe_bpp)
> +u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> +				u32 link_clock, u32 lane_count,
> +				u32 mode_clock, u32 mode_hdisplay,
> +				bool bigjoiner,
> +				u32 pipe_bpp,
> +				u32 timeslots)
>  {
>  	u32 bits_per_pixel, max_bpp_small_joiner_ram;
>  	int i;
> @@ -683,7 +683,7 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
>  	 * for MST -> TimeSlotsPerMTP has to be calculated
>  	 */
>  	bits_per_pixel = (link_clock * lane_count * 8) /
> -			 intel_dp_mode_to_fec_clock(mode_clock);
> +			 (intel_dp_mode_to_fec_clock(mode_clock) * timeslots);
>  	drm_dbg_kms(&i915->drm, "Max link bpp: %u\n", bits_per_pixel);
>  
>  	/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
> @@ -737,9 +737,9 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
>  	return bits_per_pixel << 4;
>  }
>  
> -static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> -				       int mode_clock, int mode_hdisplay,
> -				       bool bigjoiner)
> +u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> +				int mode_clock, int mode_hdisplay,
> +				bool bigjoiner)
>  {
>  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>  	u8 min_slice_count, i;
> @@ -902,8 +902,8 @@ intel_dp_mode_valid_downstream(struct intel_connector *connector,
>  	return MODE_OK;
>  }
>  
> -static bool intel_dp_need_bigjoiner(struct intel_dp *intel_dp,
> -				    int hdisplay, int clock)
> +bool intel_dp_need_bigjoiner(struct intel_dp *intel_dp,
> +			     int hdisplay, int clock)
>  {
>  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>  
> @@ -990,7 +990,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
>  							    target_clock,
>  							    mode->hdisplay,
>  							    bigjoiner,
> -							    pipe_bpp) >> 4;
> +							    pipe_bpp, 1) >> 4;
>  			dsc_slice_count =
>  				intel_dp_dsc_get_slice_count(intel_dp,
>  							     target_clock,
> @@ -1285,7 +1285,7 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
>  	return -EINVAL;
>  }
>  
> -static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
> +int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
>  {
>  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
>  	int i, num_bpc;
> @@ -1429,7 +1429,8 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
>  						    adjusted_mode->crtc_clock,
>  						    adjusted_mode->crtc_hdisplay,
>  						    pipe_config->bigjoiner_pipes,
> -						    pipe_bpp);
> +						    pipe_bpp,
> +						    1);
>  		dsc_dp_slice_count =
>  			intel_dp_dsc_get_slice_count(intel_dp,
>  						     adjusted_mode->crtc_clock,
> @@ -1444,7 +1445,114 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
>  							       dsc_max_output_bpp >> 4,
>  							       pipe_config->pipe_bpp);
>  		pipe_config->dsc.slice_count = dsc_dp_slice_count;
> +		drm_dbg_kms(&dev_priv->drm, "DSC: compressed bpp %d slice count %d\n",
> +			    pipe_config->dsc.compressed_bpp,
> +			    pipe_config->dsc.slice_count);
>  	}
> +	/*
> +	 * VDSC engine operates at 1 Pixel per clock, so if peak pixel rate
> +	 * is greater than the maximum Cdclock and if slice count is even
> +	 * then we need to use 2 VDSC instances.
> +	 */
> +	if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq) {
> +		if (pipe_config->dsc.slice_count > 1) {
> +			pipe_config->dsc.dsc_split = true;
> +		} else {
> +			drm_dbg_kms(&dev_priv->drm,
> +				    "Cannot split stream to use 2 VDSC instances\n");
> +			return -EINVAL;
> +		}
> +	}
> +
> +	ret = intel_dp_dsc_compute_params(&dig_port->base, pipe_config);
> +	if (ret < 0) {
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "Cannot compute valid DSC parameters for Input Bpp = %d "
> +			    "Compressed BPP = %d\n",
> +			    pipe_config->pipe_bpp,
> +			    pipe_config->dsc.compressed_bpp);
> +		return ret;
> +	}
> +
> +	pipe_config->dsc.compression_enable = true;
> +	drm_dbg_kms(&dev_priv->drm, "DP DSC computed with Input Bpp = %d "
> +		    "Compressed Bpp = %d Slice Count = %d\n",
> +		    pipe_config->pipe_bpp,
> +		    pipe_config->dsc.compressed_bpp,
> +		    pipe_config->dsc.slice_count);
> +
> +	return 0;
> +}
> +
> +int intel_dp_mst_dsc_compute_config(struct intel_dp *intel_dp,
> +				    struct intel_crtc_state *pipe_config,
> +				    struct drm_connector_state *conn_state,
> +				    struct link_config_limits *limits,
> +				    int timeslots)
> +{
> +	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> +	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
> +	const struct drm_display_mode *adjusted_mode =
> +		&pipe_config->hw.adjusted_mode;
> +	int pipe_bpp;
> +	int ret;
> +	u16 dsc_max_output_bpp;
> +	u8 dsc_dp_slice_count;
> +
> +	pipe_config->fec_enable = !intel_dp_is_edp(intel_dp) &&
> +		intel_dp_supports_fec(intel_dp, pipe_config);
> +
> +	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
> +		return -EINVAL;
> +
> +	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, conn_state->max_requested_bpc);
> +
> +	/* Min Input BPC for ICL+ is 8 */
> +	if (pipe_bpp < 8 * 3) {
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "No DSC support for less than 8bpc\n");
> +		return -EINVAL;
> +	}
> +
> +	/*
> +	 * For now enable DSC for max bpp, max link rate, max lane count.
> +	 * Optimize this later for the minimum possible link rate/lane count
> +	 * with DSC enabled for the requested mode.
> +	 */
> +	pipe_config->pipe_bpp = pipe_bpp;
> +	pipe_config->port_clock = limits->max_rate;
> +	pipe_config->lane_count = limits->max_lane_count;
> +
> +	dsc_max_output_bpp =
> +		intel_dp_dsc_get_output_bpp(dev_priv,
> +					    pipe_config->port_clock,
> +					    pipe_config->lane_count,
> +					    adjusted_mode->crtc_clock,
> +					    adjusted_mode->crtc_hdisplay,
> +					    pipe_config->bigjoiner_pipes,
> +					    pipe_bpp,
> +					    timeslots);
> +
> +	dsc_dp_slice_count =
> +		intel_dp_dsc_get_slice_count(intel_dp,
> +					     adjusted_mode->crtc_clock,
> +					     adjusted_mode->crtc_hdisplay,
> +					     pipe_config->bigjoiner_pipes);
> +
> +	if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
> +		drm_dbg_kms(&dev_priv->drm,
> +			    "Compressed BPP/Slice Count not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	pipe_config->dsc.compressed_bpp = min_t(u16,
> +					       dsc_max_output_bpp >> 4,
> +					       pipe_config->pipe_bpp);
> +
> +	pipe_config->dsc.slice_count = dsc_dp_slice_count;
> +	drm_dbg_kms(&dev_priv->drm, "MST DSC: compressed bpp %d slice count %d\n",
> +		    pipe_config->dsc.compressed_bpp,
> +		    pipe_config->dsc.slice_count);
>  

That looks like 100% copy-pasta from the existing function. 
Please refactor if you can't just call the existing function
directly for some reason.

-- 
Ville Syrjälä
Intel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux