On Mon, 2022-02-14 at 10:54 +0800, CK Hu wrote: > Hi, Xinlei: > > On Fri, 2022-02-11 at 22:30 +0800, xinlei.lee@xxxxxxxxxxxx wrote: > > From: Jitao Shi <jitao.shi@xxxxxxxxxxxx> > > > > In order to cooperate with patch 3/3 modification,it is necessary > > to > > adjust > > the position where mipi pulls up the signal. > > After the patch is applied, the series index (3/3) is disappear, so > do > not reference series index in commit description. I think this series > is to adjust the calling sequence, so you could describe as below: > > Old sequence: > 1. aaa > 2. bbb > 3. ccc > 4. ddd > > New sequence: > 1. bbb > 2. aaa > 3. ddd > 4. ccc > > and this patch is to adjust 'aaa' and 'bbb'. > > Regards, > CK > > > > > Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx> > > Signed-off-by: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx> > > --- > > drivers/gpu/drm/mediatek/mtk_dsi.c | 6 +++--- > > 1 file changed, 3 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c > > b/drivers/gpu/drm/mediatek/mtk_dsi.c > > index 5d90d2eb..6d7b66d 100644 > > --- a/drivers/gpu/drm/mediatek/mtk_dsi.c > > +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c > > @@ -649,14 +649,14 @@ static int mtk_dsi_poweron(struct mtk_dsi > > *dsi) > > mtk_dsi_reset_engine(dsi); > > mtk_dsi_phy_timconfig(dsi); > > > > - mtk_dsi_rxtx_control(dsi); > > - usleep_range(30, 100); > > - mtk_dsi_reset_dphy(dsi); > > mtk_dsi_ps_control_vact(dsi); > > mtk_dsi_set_vm_cmd(dsi); > > mtk_dsi_config_vdo_timing(dsi); > > mtk_dsi_set_interrupt_enable(dsi); > > > > + mtk_dsi_rxtx_control(dsi); > > + usleep_range(30, 100); > > + mtk_dsi_reset_dphy(dsi); > > mtk_dsi_clk_ulp_mode_leave(dsi); > > mtk_dsi_lane0_ulp_mode_leave(dsi); > > mtk_dsi_clk_hs_mode(dsi, 0); > > Hi CK: Thanks for your review! I will be sending out v2 in the near future based on your suggestion. Best Regards! xinlei
