Re: [PATCH v5 19/23] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Feb 10, 2022 at 02:15:17PM +0100, Johan Jonker wrote:
> 
> 
> On 2/10/22 12:47, Sascha Hauer wrote:
> > On Thu, Feb 10, 2022 at 01:10:32AM +0100, Johan Jonker wrote:
> >> Hi Sascha,
> >>
> >> Something with port and endpoint gives notifications.
> >> Somehow with the conversion of rockchip,dw-hdmi.txt to YAML not all SoC
> >> options were checked/covered (see rk3328 and rk3568).
> >>
> >> Allow multiple vop:
> >> port or
> >> port@0
> >> 1x vop -> endpoint
> >>
> >> 2x vop -> endpoint@0
> >>        -> endpoint@1
> >>
> >> Also allow for connector:
> >> (not all existing DT have this yet)
> >> port@1
> >>       -> endpoint
> >>
> >> See also at graph.yaml
> > 
> > Ok, let me see if I get this right. The HDMI can either have one or two
> > ports. It has one when the HDMI connector is not described in the device
> > tree and two when it is. Also the first (or only) port can have one or
> > two endpoints. It has one endpoint when the SoC has a single VOP and two
> > endpoints when the SoC has two VOPs.
> > 
> > It's been a painful morning because my YAML knowledge is fairly limited,
> > but here's what I came up with:
> > 
> >   ports:
> >     $ref: /schemas/graph.yaml#/properties/ports
> >     unevaluatedProperties: false
> >     patternProperties:
> >       "^port(@0)?$":
> >         $ref: /schemas/graph.yaml#/properties/port
> >         description: Input of the DWC HDMI TX
> >         properties:
> >           endpoint:
> >             description: Connection to the VOP
> >           endpoint@0:
> >             description: Connection to the VOPB
> >           endpoint@1:
> >             description: Connection to the VOPL
> >     properties:
> >       port@1:
> >         $ref: /schemas/graph.yaml#/properties/port
> >         description: Output of the DWC HDMI TX
> > 
> > Does this look sane to you? With this a make dtbs_check on this binding
> > doesn't generate warnings anymore, and even better it does generate
> > warnings when I add some wrong nodes/properties to the dts files.
> 
> Hi,
> 
> Send a patch to rob+dt and he will let you know... ;)

;)

> 
> Also could you test the ARM branch as well just for sure with:
> ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make  dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml

That works fine except for iahb and isfr clocks in the wrong order in
arch/arm/boot/dts/rk322x.dtsi.

> 
> Could you group your serie a bit:
> dt-bindings
> drm patches
> dts changes

That's the order I originally had. Heiko asked me to put the
bindings, dts changes and driver patches together dor each topic.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux