On 2/10/22 12:47, Sascha Hauer wrote: > On Thu, Feb 10, 2022 at 01:10:32AM +0100, Johan Jonker wrote: >> Hi Sascha, >> >> Something with port and endpoint gives notifications. >> Somehow with the conversion of rockchip,dw-hdmi.txt to YAML not all SoC >> options were checked/covered (see rk3328 and rk3568). >> >> Allow multiple vop: >> port or >> port@0 >> 1x vop -> endpoint >> >> 2x vop -> endpoint@0 >> -> endpoint@1 >> >> Also allow for connector: >> (not all existing DT have this yet) >> port@1 >> -> endpoint >> >> See also at graph.yaml > > Ok, let me see if I get this right. The HDMI can either have one or two > ports. It has one when the HDMI connector is not described in the device > tree and two when it is. Also the first (or only) port can have one or > two endpoints. It has one endpoint when the SoC has a single VOP and two > endpoints when the SoC has two VOPs. > > It's been a painful morning because my YAML knowledge is fairly limited, > but here's what I came up with: > > ports: > $ref: /schemas/graph.yaml#/properties/ports > unevaluatedProperties: false > patternProperties: > "^port(@0)?$": > $ref: /schemas/graph.yaml#/properties/port > description: Input of the DWC HDMI TX > properties: > endpoint: > description: Connection to the VOP > endpoint@0: > description: Connection to the VOPB > endpoint@1: > description: Connection to the VOPL > properties: > port@1: > $ref: /schemas/graph.yaml#/properties/port > description: Output of the DWC HDMI TX > > Does this look sane to you? With this a make dtbs_check on this binding > doesn't generate warnings anymore, and even better it does generate > warnings when I add some wrong nodes/properties to the dts files. Hi, Send a patch to rob+dt and he will let you know... ;) Also could you test the ARM branch as well just for sure with: ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml Could you group your serie a bit: dt-bindings drm patches dts changes Johan > >> === >> >> dtc -I dtb -O dts rk3568-evb1-v10.dtb >> <stdout>: Warning (avoid_unnecessary_addr_size): >> /hdmi@fe0a0000/ports/port@1: unnecessary #address-cells/#size-cells >> without "ranges" or child "reg" property >> <stdout>: Warning (graph_child_address): /hdmi@fe0a0000/ports/port@0: >> graph node has single child node 'endpoint@0', >> #address-cells/#size-cells are not necessary >> <stdout>: Warning (graph_child_address): /hdmi@fe0a0000/ports/port@1: >> graph node has single child node 'endpoint', #address-cells/#size-cells >> are not necessary > > That's easy. I dropped the @0 suffix and reg property from the node. > > Sascha >
