Re: [PATCH 1/2] drm/msm: add support for QCM2290 MDSS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/01/2022 18:47, Loic Poulain wrote:
Add compatibility for QCM2290 display subsystem, including
required entries in DPU hw catalog.

Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 175 ++++++++++++++++++++++++-
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h |   1 +
  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c        |   1 +
  drivers/gpu/drm/msm/msm_drv.c                  |   1 +
  4 files changed, 177 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index ce6f32a..7fa3fc7 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -25,6 +25,8 @@
  #define VIG_SM8250_MASK \
  	(VIG_MASK | BIT(DPU_SSPP_QOS_8LVL) | BIT(DPU_SSPP_SCALER_QSEED3LITE))
+#define VIG_QCM2290_MASK VIG_MASK

| BIT(DPU_SSPP_QOS_8LVL)

+
  #define DMA_SDM845_MASK \
  	(BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\
  	BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
@@ -251,6 +253,18 @@ static const struct dpu_caps sc7280_dpu_caps = {
  	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
  };
+static const struct dpu_caps qcm2290_dpu_caps = {
+	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.max_mixer_blendstages = 0x4,
+	.qseed_type = DPU_SSPP_SCALER_QSEED4,

If there is no scaler, we probably shouldn't define it here too.

+	.smart_dma_rev = DPU_SSPP_SMART_DMA_V2,
+	.ubwc_version = DPU_HW_UBWC_VER_20,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.max_linewidth = 2160,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
  static const struct dpu_mdp_cfg sdm845_mdp[] = {
  	{
  	.name = "top_0", .id = MDP_TOP,
@@ -336,6 +350,19 @@ static const struct dpu_mdp_cfg sc7280_mdp[] = {
  	},
  };
+static const struct dpu_mdp_cfg qcm2290_mdp[] = {
+	{
+	.name = "top_0", .id = MDP_TOP,
+	.base = 0x0, .len = 0x494,
+	.features = 0,
+	.highest_bank_bit = 0x2,
+	.clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+		.reg_off = 0x2AC, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+		.reg_off = 0x2AC, .bit_off = 8},
+	},
+};
+
  /*************************************************************
   * CTL sub blocks config
   *************************************************************/
@@ -459,6 +486,15 @@ static const struct dpu_ctl_cfg sc7280_ctl[] = {
  	},
  };
+static const struct dpu_ctl_cfg qcm2290_ctl[] = {
+	{
+	.name = "ctl_0", .id = CTL_0,
+	.base = 0x1000, .len = 0x1dc,
+	.features = BIT(DPU_CTL_ACTIVE_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+	},
+};
+
  /*************************************************************
   * SSPP sub blocks config
   *************************************************************/
@@ -595,6 +631,30 @@ static const struct dpu_sspp_cfg sc7280_sspp[] = {
  		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
  };
+
+#define _QCM2290_VIG_SBLK(num, sdma_pri) \

Let's call it _VIG_SBLK_NOSCALE?

+	{ \
+	.maxdwnscale = SSPP_UNITY_SCALE, \
+	.maxupscale = SSPP_UNITY_SCALE, \
+	.smart_dma_priority = sdma_pri, \
+	.src_blk = {.name = STRCAT("sspp_src_", num), \
+		.id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \

No scaler for VIG SSPP?

+	.format_list = plane_formats_yuv, \
+	.num_formats = ARRAY_SIZE(plane_formats_yuv), \
+	.virt_format_list = plane_formats, \
+	.virt_num_formats = ARRAY_SIZE(plane_formats), \
+	}
+
+static const struct dpu_sspp_sub_blks qcm2290_vig_sblk_0 = _QCM2290_VIG_SBLK("0", 2);
+static const struct dpu_sspp_sub_blks qcm2290_dma_sblk_0 = _DMA_SBLK("8", 1);
+
+static const struct dpu_sspp_cfg qcm2290_sspp[] = {
+	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_QCM2290_MASK,
+		 qcm2290_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000,  DMA_SDM845_MASK,
+		 qcm2290_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+};
+
  /*************************************************************
   * MIXER sub blocks config
   *************************************************************/
@@ -679,6 +739,21 @@ static const struct dpu_lm_cfg sc7280_lm[] = {
  		&sc7180_lm_sblk, PINGPONG_3, LM_2, 0),
  };
+/* QCM2290 */
+
+static const struct dpu_lm_sub_blks qcm2290_lm_sblk = {
+	.maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+	.maxblendstages = 4, /* excluding base layer */
+	.blendstage_base = { /* offsets relative to mixer base */
+		0x20, 0x38, 0x50, 0x68
+	},
+};
+
+static const struct dpu_lm_cfg qcm2290_lm[] = {
+	LM_BLK("lm_0", LM_0, 0x44000, MIXER_SC7180_MASK,
+		&qcm2290_lm_sblk, PINGPONG_0, 0, DSPP_0),
+};
+
  /*************************************************************
   * DSPP sub blocks config
   *************************************************************/
@@ -692,6 +767,11 @@ static const struct dpu_dspp_sub_blks sm8150_dspp_sblk = {
  		.len = 0x90, .version = 0x40000},
  };
+static const struct dpu_dspp_sub_blks qcm2290_dspp_sblk = {
+	.pcc = {.id = DPU_DSPP_PCC, .base = 0x1700,
+		.len = 0x90, .version = 0x40000},
+};
+

Use sm8150_dspp_sblk here

  #define DSPP_BLK(_name, _id, _base, _mask, _sblk) \
  		{\
  		.name = _name, .id = _id, \
@@ -716,6 +796,11 @@ static const struct dpu_dspp_cfg sm8150_dspp[] = {
  		 &sm8150_dspp_sblk),
  };
+static const struct dpu_dspp_cfg qcm2290_dspp[] = {
+	DSPP_BLK("dspp_0", DSPP_0, 0x54000, DSPP_SC7180_MASK,
+		 &qcm2290_dspp_sblk),
+};
+
  /*************************************************************
   * PINGPONG sub blocks config
   *************************************************************/
@@ -736,6 +821,11 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = {
  	.len = 0x20, .version = 0x20000},
  };
+static const struct dpu_pingpong_sub_blks qcm2290_pp_sblk = {
+	.dither = {.id = DPU_PINGPONG_DITHER, .base = 0x30e0,
+		.len = 0x20, .version = 0x10000},
+};
+
You can use sdm845_pp_sblk instead.

  #define PP_BLK_TE(_name, _id, _base, _merge_3d, _sblk, _done, _rdptr) \
  	{\
  	.name = _name, .id = _id, \
@@ -798,6 +888,12 @@ static const struct dpu_pingpong_cfg sm8150_pp[] = {
  			-1),
  };
+static struct dpu_pingpong_cfg qcm2290_pp[] = {
+	PP_BLK("pingpong_0", PINGPONG_0, 0x70000, 0, qcm2290_pp_sblk,
+		DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
+		DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12)),
+};
+
  /*************************************************************
   * MERGE_3D sub blocks config
   *************************************************************/
@@ -861,6 +957,11 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
  	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_EDP, 0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
  };
+static const struct dpu_intf_cfg qcm2290_intf[] = {
+	INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
+	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
+};
+
  /*************************************************************
   * VBIF sub blocks config
   *************************************************************/
@@ -931,6 +1032,10 @@ static const struct dpu_qos_lut_entry sm8150_qos_linear[] = {
  	{.fl = 0, .lut = 0x0011222222223357 },
  };
+static const struct dpu_qos_lut_entry qcm2290_qos_linear[] = {
+	{.fl = 0, .lut = 0x0011222222335777},
+};
+
  static const struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
  	{.fl = 10, .lut = 0x344556677},
  	{.fl = 11, .lut = 0x3344556677},
@@ -1102,6 +1207,42 @@ static const struct dpu_perf_cfg sc7280_perf_data = {
  	.bw_inefficiency_factor = 120,
  };
+static const struct dpu_perf_cfg qcm2290_perf_data = {
+	.max_bw_low = 2700000,
+	.max_bw_high = 2700000,
+	.min_core_ib = 1300000,
+	.min_llcc_ib = 0,
+	.min_dram_ib = 1600000,
+	.min_prefill_lines = 24,
+	.danger_lut_tbl = {0xff, 0x0, 0x0},
+	.safe_lut_tbl = {0xfff0, 0x0, 0x0},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(qcm2290_qos_linear),
+		.entries = qcm2290_qos_linear
+		},
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+	.clk_inefficiency_factor = 105,
+	.bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_vbif_cfg qcm2290_vbif[] = {
+	{
+	.name = "vbif_0", .id = VBIF_0,
+	.base = 0, .len = 0x1040,
+	.features = BIT(DPU_VBIF_QOS_REMAP),
+	.xin_halt_timeout = 0x4000,
+	.qos_rt_tbl = {
+		.npriority_lvl = ARRAY_SIZE(sdm845_rt_pri_lvl),
+		.priority_lvl = sdm845_rt_pri_lvl,
+		},
+	.memtype_count = 14,
+	.memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3},
+	},
+};

The only difference from sdm845_vbif is the lack of .qos_nrt_tbl. Is this on purpose?

  /*************************************************************
   * Hardware catalog init
   *************************************************************/
@@ -1255,6 +1396,38 @@ static void sc7280_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
  	};
  }
+
+/*
+ * qcm2290_cfg_init(): populate qcm2290 dpu sub-blocks reg offsets
+ * and instance counts.
+ */
+static void qcm2290_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
+{
+	*dpu_cfg = (struct dpu_mdss_cfg){
+		.caps = &qcm2290_dpu_caps,
+		.mdp_count = ARRAY_SIZE(qcm2290_mdp),
+		.mdp = qcm2290_mdp,
+		.ctl_count = ARRAY_SIZE(qcm2290_ctl),
+		.ctl = qcm2290_ctl,
+		.sspp_count = ARRAY_SIZE(qcm2290_sspp),
+		.sspp = qcm2290_sspp,
+		.mixer_count = ARRAY_SIZE(qcm2290_lm),
+		.mixer = qcm2290_lm,
+		.dspp_count = ARRAY_SIZE(qcm2290_dspp),
+		.dspp = qcm2290_dspp,
+		.pingpong_count = ARRAY_SIZE(qcm2290_pp),
+		.pingpong = qcm2290_pp,
+		.intf_count = ARRAY_SIZE(qcm2290_intf),
+		.intf = qcm2290_intf,
+		.vbif_count = ARRAY_SIZE(qcm2290_vbif),
+		.vbif = qcm2290_vbif,
+		.reg_dma_count = 1,
+		.dma_cfg = sdm845_regdma,
+		.perf = qcm2290_perf_data,
+		.mdss_irqs = IRQ_SC7180_MASK,
+	};
+}
+
  static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
  	{ .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init},
  	{ .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
@@ -1262,6 +1435,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
  	{ .hw_rev = DPU_HW_VER_501, .cfg_init = sm8150_cfg_init},
  	{ .hw_rev = DPU_HW_VER_600, .cfg_init = sm8250_cfg_init},
  	{ .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
+	{ .hw_rev = DPU_HW_VER_650, .cfg_init = qcm2290_cfg_init},
  	{ .hw_rev = DPU_HW_VER_720, .cfg_init = sc7280_cfg_init},
  };
@@ -1291,4 +1465,3 @@ struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
  	dpu_hw_catalog_deinit(dpu_cfg);
  	return ERR_PTR(-ENODEV);
  }
-
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 4ade44b..6d4eb46f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -41,6 +41,7 @@
  #define DPU_HW_VER_501	DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
  #define DPU_HW_VER_600	DPU_HW_VER(6, 0, 0) /* sm8250 */
  #define DPU_HW_VER_620	DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
+#define DPU_HW_VER_650	DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
  #define DPU_HW_VER_720	DPU_HW_VER(7, 2, 0) /* sc7280 */
#define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index a15b264..7e8d8a6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1286,6 +1286,7 @@ static const struct dev_pm_ops dpu_pm_ops = {
  };
static const struct of_device_id dpu_dt_match[] = {
+	{ .compatible = "qcom,qcm2290-dpu", },
  	{ .compatible = "qcom,sdm845-dpu", },
  	{ .compatible = "qcom,sc7180-dpu", },
  	{ .compatible = "qcom,sc7280-dpu", },
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 7936e8d..ebd5266 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1434,6 +1434,7 @@ static void msm_pdev_shutdown(struct platform_device *pdev)
  static const struct of_device_id dt_match[] = {
  	{ .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 },
  	{ .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
+	{ .compatible = "qcom,qcm2290-mdss", .data = (void *)KMS_DPU },
  	{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
  	{ .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
  	{ .compatible = "qcom,sc7280-mdss", .data = (void *)KMS_DPU },


--
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux