On Sat, Oct 09, 2021 at 05:12:44PM +0200, Sam Ravnborg wrote:
> Hi Oleksij, Robin,
>
> On Thu, Sep 30, 2021 at 12:05:00PM +0200, Oleksij Rempel wrote:
> > Add compatible and timings for the Innolux G070Y2-T02 panel. It is 7"
> > WVGA (800x480) TFT LCD panel with TTL interface and a backlight unit.
> >
> > Co-Developed-by: Robin van der Gracht <robin@xxxxxxxxxxx>
> > Signed-off-by: Robin van der Gracht <robin@xxxxxxxxxxx>
> > Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/panel/panel-simple.c | 16 ++++++++++++++++
> > 1 file changed, 16 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> > index 9b6c4e6c38a1..a03b60f6fa99 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -2524,6 +2524,19 @@ static const struct panel_desc innolux_g070y2_l01 = {
> > .connector_type = DRM_MODE_CONNECTOR_LVDS,
> > };
> >
> > +static const struct panel_desc innolux_g070y2_t02 = {
> > + .modes = &innolux_at070tn92_mode,
>
> It is suprising to see that the innolux_g070y2_t02 uses the mode
> innolux_at070tn92_mode.
> Is it on purpose?
yes.
> If yes then I would expect the changelog to say so.
>
> In most (all?) other cases the panel provide their own mode.
It works with same timing values. What is the preferred way, add own
mode or extend the changelog?
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
