Re: [PATCH v2, 1/1] mailbox: cmdq: add instruction time-out interrupt support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Yongqiang:

Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx> 於 2021年9月30日 週四 下午9:18寫道:
>
> add time-out cycle setting to make sure time-out interrupt irq
> will happened when instruction time-out for wait and poll
>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx>
> ---
>  drivers/mailbox/mtk-cmdq-mailbox.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
> index 64175a893312..197b03222f94 100644
> --- a/drivers/mailbox/mtk-cmdq-mailbox.c
> +++ b/drivers/mailbox/mtk-cmdq-mailbox.c
> @@ -36,6 +36,7 @@
>  #define CMDQ_THR_END_ADDR              0x24
>  #define CMDQ_THR_WAIT_TOKEN            0x30
>  #define CMDQ_THR_PRIORITY              0x40
> +#define CMDQ_THR_INSTN_TIMEOUT_CYCLES  0x50
>
>  #define GCE_GCTL_VALUE                 0x48
>
> @@ -54,6 +55,15 @@
>  #define CMDQ_JUMP_BY_OFFSET            0x10000000
>  #define CMDQ_JUMP_BY_PA                        0x10000001
>
> +/*
> + * instruction time-out
> + * cycles to issue instruction time-out interrupt for wait and poll instructions
> + * GCE axi_clock 156MHz
> + * 1 cycle = 6.41ns
> + * instruction time out 2^22*2*6.41ns = 53ms

For different clients, the timeout value would be different, and each
client could use timer to detect timeout, so it's not necessary to
enable timeout in cmdq driver.

Regards,
Chun-Kuang.

> + */
> +#define CMDQ_INSTN_TIMEOUT_CYCLES      22
> +
>  struct cmdq_thread {
>         struct mbox_chan        *chan;
>         void __iomem            *base;
> @@ -376,6 +386,7 @@ static int cmdq_mbox_send_data(struct mbox_chan *chan, void *data)
>                 writel((task->pa_base + pkt->cmd_buf_size) >> cmdq->shift_pa,
>                        thread->base + CMDQ_THR_END_ADDR);
>
> +               writel(CMDQ_INSTN_TIMEOUT_CYCLES, thread->base + CMDQ_THR_INSTN_TIMEOUT_CYCLES);
>                 writel(thread->priority, thread->base + CMDQ_THR_PRIORITY);
>                 writel(CMDQ_THR_IRQ_EN, thread->base + CMDQ_THR_IRQ_ENABLE);
>                 writel(CMDQ_THR_ENABLED, thread->base + CMDQ_THR_ENABLE_TASK);
> --
> 2.25.1
>




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux