On Tue, 2021-10-05 at 07:41 +0800, Chun-Kuang Hu wrote: > Hi, Yongqiang: > > Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx> 於 2021年9月30日 週四 下午9:18寫道: > > > > add time-out cycle setting to make sure time-out interrupt irq > > will happened when instruction time-out for wait and poll > > > > Signed-off-by: Yongqiang Niu <yongqiang.niu@xxxxxxxxxxxx> > > --- > > drivers/mailbox/mtk-cmdq-mailbox.c | 11 +++++++++++ > > 1 file changed, 11 insertions(+) > > > > diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c > > b/drivers/mailbox/mtk-cmdq-mailbox.c > > index 64175a893312..197b03222f94 100644 > > --- a/drivers/mailbox/mtk-cmdq-mailbox.c > > +++ b/drivers/mailbox/mtk-cmdq-mailbox.c > > @@ -36,6 +36,7 @@ > > #define CMDQ_THR_END_ADDR 0x24 > > #define CMDQ_THR_WAIT_TOKEN 0x30 > > #define CMDQ_THR_PRIORITY 0x40 > > +#define CMDQ_THR_INSTN_TIMEOUT_CYCLES 0x50 > > > > #define GCE_GCTL_VALUE 0x48 > > > > @@ -54,6 +55,15 @@ > > #define CMDQ_JUMP_BY_OFFSET 0x10000000 > > #define CMDQ_JUMP_BY_PA 0x10000001 > > > > +/* > > + * instruction time-out > > + * cycles to issue instruction time-out interrupt for wait and > > poll instructions > > + * GCE axi_clock 156MHz > > + * 1 cycle = 6.41ns > > + * instruction time out 2^22*2*6.41ns = 53ms > > For different clients, the timeout value would be different, and each > client could use timer to detect timeout, so it's not necessary to > enable timeout in cmdq driver. > > Regards, > Chun-Kuang. if we do not set cmdq hardware timeout, this condition will never happen cmdq_thread_irq_handler if (irq_flag & CMDQ_THR_IRQ_ERROR) err = true; and no error callback else if (err) { cmdq_task_exec_done(task, -ENOEXEC); cmdq_task_handle_error(curr_task); kfree(task); } the client will never received the error callback, cmdq hardware will poll the event for ever and no report timeout > > > + */ > > +#define CMDQ_INSTN_TIMEOUT_CYCLES 22 > > + > > struct cmdq_thread { > > struct mbox_chan *chan; > > void __iomem *base; > > @@ -376,6 +386,7 @@ static int cmdq_mbox_send_data(struct mbox_chan > > *chan, void *data) > > writel((task->pa_base + pkt->cmd_buf_size) >> cmdq- > > >shift_pa, > > thread->base + CMDQ_THR_END_ADDR); > > > > + writel(CMDQ_INSTN_TIMEOUT_CYCLES, thread->base + > > CMDQ_THR_INSTN_TIMEOUT_CYCLES); > > writel(thread->priority, thread->base + > > CMDQ_THR_PRIORITY); > > writel(CMDQ_THR_IRQ_EN, thread->base + > > CMDQ_THR_IRQ_ENABLE); > > writel(CMDQ_THR_ENABLED, thread->base + > > CMDQ_THR_ENABLE_TASK); > > -- > > 2.25.1 > >