Re: [PATCH] drm/msm: Disable frequency clamping on a630

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 4 Sept 2021 at 01:55, Rob Clark <robdclark@xxxxxxxxx> wrote:
>
> On Fri, Sep 3, 2021 at 12:39 PM John Stultz <john.stultz@xxxxxxxxxx> wrote:
> >
> > On Thu, Jul 29, 2021 at 1:49 PM Rob Clark <robdclark@xxxxxxxxx> wrote:
> > > On Thu, Jul 29, 2021 at 1:28 PM Caleb Connolly
> > > <caleb.connolly@xxxxxxxxxx> wrote:
> > > > On 29/07/2021 21:24, Rob Clark wrote:
> > > > > On Thu, Jul 29, 2021 at 1:06 PM Caleb Connolly
> > > > > <caleb.connolly@xxxxxxxxxx> wrote:
> > > > >>
> > > > >> Hi Rob,
> > > > >>
> > > > >> I've done some more testing! It looks like before that patch ("drm/msm: Devfreq tuning") the GPU would never get above
> > > > >> the second frequency in the OPP table (342MHz) (at least, not in glxgears). With the patch applied it would more
> > > > >> aggressively jump up to the max frequency which seems to be unstable at the default regulator voltages.
> > > > >
> > > > > *ohh*, yeah, ok, that would explain it
> > > > >
> > > > >> Hacking the pm8005 s1 regulator (which provides VDD_GFX) up to 0.988v (instead of the stock 0.516v) makes the GPU stable
> > > > >> at the higher frequencies.
> > > > >>
> > > > >> Applying this patch reverts the behaviour, and the GPU never goes above 342MHz in glxgears, losing ~30% performance in
> > > > >> glxgear.
> > > > >>
> > > > >> I think (?) that enabling CPR support would be the proper solution to this - that would ensure that the regulators run
> > > > >> at the voltage the hardware needs to be stable.
> > > > >>
> > > > >> Is hacking the voltage higher (although ideally not quite that high) an acceptable short term solution until we have
> > > > >> CPR? Or would it be safer to just not make use of the higher frequencies on a630 for now?
> > > > >>
> > > > >
> > > > > tbh, I'm not sure about the regulator stuff and CPR.. Bjorn is already
> > > > > on CC and I added sboyd, maybe one of them knows better.
> > > > >
> > > > > In the short term, removing the higher problematic OPPs from dts might
> > > > > be a better option than this patch (which I'm dropping), since there
> > > > > is nothing stopping other workloads from hitting higher OPPs.
> > > > Oh yeah that sounds like a more sensible workaround than mine .
> > > > >
> > > > > I'm slightly curious why I didn't have problems at higher OPPs on my
> > > > > c630 laptop (sdm850)
> > > > Perhaps you won the sillicon lottery - iirc sdm850 is binned for higher clocks as is out of the factory.
> > > >
> > > > Would it be best to drop the OPPs for all devices? Or just those affected? I guess it's possible another c630 might
> > > > crash where yours doesn't?
> > >
> > > I've not heard any reports of similar issues from the handful of other
> > > folks with c630's on #aarch64-laptops.. but I can't really say if that
> > > is luck or not.
> > >
> > > Maybe just remove it for affected devices?  But I'll defer to Bjorn.
> >
> > Just as another datapoint, I was just marveling at how suddenly smooth
> > the UI was performing on db845c and Caleb pointed me at the "drm/msm:
> > Devfreq tuning" patch as the likely cause of the improvement, and
> > mid-discussion my board crashed into USB crash mode:
> > [  146.157696][    C0] adreno 5000000.gpu: CP | AHB bus error
> > [  146.163303][    C0] adreno 5000000.gpu: CP | AHB bus error
> > [  146.168837][    C0] adreno 5000000.gpu: RBBM | ATB bus overflow
> > [  146.174960][    C0] adreno 5000000.gpu: CP | HW fault | status=0x00000000
> > [  146.181917][    C0] adreno 5000000.gpu: CP | AHB bus error
> > [  146.187547][    C0] adreno 5000000.gpu: CP illegal instruction error
> > [  146.194009][    C0] adreno 5000000.gpu: CP | AHB bus error
> > [  146.308909][    T9] Internal error: synchronous external abort:
> > 96000010 [#1] PREEMPT SMP
> > [  146.317150][    T9] Modules linked in:
> > [  146.320941][    T9] CPU: 3 PID: 9 Comm: kworker/u16:1 Tainted: G
> >     W         5.14.0-mainline-06795-g42b258c2275c #24
> > [  146.331974][    T9] Hardware name: Thundercomm Dragonboar
> > Format: Log Type - Time(microsec) - Message - Optional Info
> > Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
> > S - QC_IMAGE_VERSION_STRING=BOOT.XF.2.0-00371-SDM845LZB-1
> > S - IMAGE_VARIANT_STRING=SDM845LA
> > S - OEM_IMAGE_VERSION_STRING=TSBJ-FA-PC-02170
> >
> > So Caleb sent me to this thread. :)
> >
> > I'm still trying to trip it again, but it does seem like db845c is
> > also seeing some stability issues with Linus' HEAD.
> >
>
> Caleb's original pastebin seems to have expired (or at least require
> some sort of ubuntu login to access).. were the crashes he was seeing
> also 'AHB bus error'?

I can reproduce this hard crash
https://www.irccloud.com/pastebin/Cu6UJntE/ and a gpu lockup
https://www.irccloud.com/pastebin/6Ryd2Pug/ at times reliably, by
running antutu benchmark on pocof1.

Reverting 9bc95570175a ("drm/msm: Devfreq tuning") helps and I no
longer see these errors.

Complete dmesg for hardcrash https://pastebin.com/raw/GLZVQFQN

Regards,
Amit Pundir

>
> If you have a reliable reproducer, I guess it would be worth seeing if
> increasing the min_freq (ie. to limit how far we jump the freq in one
> shot) "fixes" it?
>
> I guess I could check downstream kgsl to see if they were doing
> something to increase freq in smaller increments.. I don't recall that
> they were but it has been a while since I dug thru that code.  And I
> suppose downstream it could also be done in their custom tz governor.
>
> BR,
> -R



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux