Re: [RFC PATCH 1/8] dt-bindings: drm/panel-simple: Introduce generic eDP panels

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, Jul 29, 2021 at 1:27 PM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> IMO, you should move any applicable compatibles to the edp-panel schema.
> Also, I don't think you should add 'edp-panel' to them. If they can work
> better with the generic eDP driver, then that should be an internal
> kernel change without a DT change. Also, if 2 different drivers match on
> compatible, it's a roll of the dice which driver binds.

So overall what I was going for is this:

1. I want to be able to specify _just_ "edp-panel" for new boards.
We'll make sure this is how it looks on devices that go through the
factory and thus we can make sure that the driver can recognize all
panels that get shipped.

2. For existing boards, I'd like to be able to move them to use
"edp-panel" but I'm less confident that I can really say exactly what
panels are out there in the field. Even though our device tree has
always listed only one panel, in truth boards have shipped with more
than one and they've just been "compatible enough" with each other
(this "white lie" is what I'm trying to fix). If somehow the generic
"edp-panel" doesn't recognize a panel then I wanted to be able to use
the old timings we'd always had before as a "fallback". That means
that logically I wanted "edp-panel" to be first and only fallback to
the old compatible string if we didn't recognize the panel ID that
came from the EDID. In truth, both compatible strings are handled by
the same driver the driver patch I submitted tried to be smart.

Perhaps that above is over ambitious and it'd be better to just drop
the whole "fallback" concept. If a board manufacturer wants to start
using the "edp-panel" concept then maybe the right idea is to force
them to bump the "board id" and then we can pick a new device tree
revision. Then we can make sure all boards that come out of the
factory with that new "board id" can be identified properly in the
EDID. This will also get rid of some of the complexity in the driver
patch, which is nice. I'll plan on doing this and address your other
feedback for a v2.


-Doug



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux