The goal of this patch series is to move away from hardcoding exact eDP panels in device tree files. As discussed in the various patches in this series (I'm not repeating everything here), most eDP panels are 99% probable and we can get that last 1% by allowing two "power up" delays to be specified in the device tree file and then using the panel ID (found in the EDID) to look up additional power sequencing delays for the panel. This patch series is the logical contiunation of a previous patch series where I proposed solving this problem by adding a board-specific compatible string [1]. In the discussion that followed it sounded like people were open to something like the solution proposed in this new series. [1] https://lore.kernel.org/r/YFKQaXOmOwYyeqvM@xxxxxxxxxx/ Douglas Anderson (8): dt-bindings: drm/panel-simple: Introduce generic eDP panels drm/edid: Break out reading block 0 of the EDID drm/edid: Allow the querying/working with the panel ID from the EDID drm/panel-simple: Don't re-read the EDID every time we power off the panel drm/panel-simple: Copy "desc" into driver data; don't store a pointer drm/panel-simple: Split the delay structure out of the panel description drm/panel-simple: Implement generic "edp-panel"s probed by EDID arm64: dts: qcom: sc7180: trogdor devices can use probable eDP panels .../bindings/display/panel/panel-edp.yaml | 196 ++++++ .../bindings/display/panel/panel-simple.yaml | 559 +++++++++--------- .../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 2 +- .../sc7180-trogdor-lazor-limozeen-nots.dts | 2 +- .../qcom/sc7180-trogdor-lazor-limozeen.dts | 2 +- .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 3 +- .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 2 +- drivers/gpu/drm/drm_edid.c | 113 +++- drivers/gpu/drm/panel/panel-simple.c | 497 +++++++++++----- include/drm/drm_edid.h | 47 ++ 10 files changed, 965 insertions(+), 458 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/panel/panel-edp.yaml -- 2.32.0.432.gabb21c7263-goog
