Decoder input LVDS format is a property of the decoder chip or even
its strapping. Handle data-mapping the same way lvds-panel does. In
case data-mapping is not present, do nothing, since there are still
legacy bindings which do not specify this property.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
To: dri-devel@xxxxxxxxxxxxxxxxxxxxx
---
V2: Use .atomic_get_input_bus_fmts for the decoder, separate funcs for encoder
---
drivers/gpu/drm/bridge/lvds-codec.c | 71 ++++++++++++++++++++++++++++-
1 file changed, 69 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c
index dcf579a4cf833..d7ec8c4e30f33 100644
--- a/drivers/gpu/drm/bridge/lvds-codec.c
+++ b/drivers/gpu/drm/bridge/lvds-codec.c
@@ -12,6 +12,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <drm/drm_atomic_helper.h>
#include <drm/drm_bridge.h>
#include <drm/drm_panel.h>
@@ -22,6 +23,7 @@ struct lvds_codec {
struct regulator *vcc;
struct gpio_desc *powerdown_gpio;
u32 connector_type;
+ unsigned int bus_format;
};
static inline struct lvds_codec *to_lvds_codec(struct drm_bridge *bridge)
@@ -68,18 +70,56 @@ static void lvds_codec_disable(struct drm_bridge *bridge)
"Failed to disable regulator \"vcc\": %d\n", ret);
}
-static const struct drm_bridge_funcs funcs = {
+static const struct drm_bridge_funcs funcs_encoder = {
.attach = lvds_codec_attach,
.enable = lvds_codec_enable,
.disable = lvds_codec_disable,
};
+#define MAX_INPUT_SEL_FORMATS 1
+static u32 *
+lvds_codec_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ struct lvds_codec *lvds_codec = to_lvds_codec(bridge);
+ u32 *input_fmts;
+
+ *num_input_fmts = 0;
+
+ input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ input_fmts[0] = lvds_codec->bus_format;
+ *num_input_fmts = MAX_INPUT_SEL_FORMATS;
+
+ return input_fmts;
+}
+
+static const struct drm_bridge_funcs funcs_decoder = {
+ .attach = lvds_codec_attach,
+ .enable = lvds_codec_enable,
+ .disable = lvds_codec_disable,
+ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+ .atomic_reset = drm_atomic_helper_bridge_reset,
+ .atomic_get_input_bus_fmts = lvds_codec_atomic_get_input_bus_fmts,
+};
+
static int lvds_codec_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *panel_node;
struct drm_panel *panel;
struct lvds_codec *lvds_codec;
+ const char *mapping;
+ int ret;
+ u32 val;
lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
if (!lvds_codec)
@@ -119,13 +159,40 @@ static int lvds_codec_probe(struct platform_device *pdev)
if (IS_ERR(lvds_codec->panel_bridge))
return PTR_ERR(lvds_codec->panel_bridge);
+ /*
+ * Decoder input LVDS format is a property of the decoder chip or even
+ * its strapping. Handle data-mapping the same way lvds-panel does. In
+ * case data-mapping is not present, do nothing, since there are still
+ * legacy bindings which do not specify this property.
+ */
+ if (lvds_codec->connector_type != DRM_MODE_CONNECTOR_LVDS) {
+ ret = of_property_read_string(dev->of_node, "data-mapping",
+ &mapping);
+ if (ret < 0) {
+ dev_err(dev, "missing 'data-mapping' DT property\n");
+ } else {
+ if (!strcmp(mapping, "jeida-18")) {
+ lvds_codec->bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG;
+ } else if (!strcmp(mapping, "jeida-24")) {
+ lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA;
+ } else if (!strcmp(mapping, "vesa-24")) {
+ lvds_codec->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG;
+ } else {
+ dev_err(dev, "invalid 'data-mapping' DT property\n");
+ return -EINVAL;
+ }
+ }
+ lvds_codec->bridge.funcs = &funcs_decoder;
+ } else {
+ lvds_codec->bridge.funcs = &funcs_encoder;
+ }
+
/*
* The panel_bridge bridge is attached to the panel's of_node,
* but we need a bridge attached to our of_node for our user
* to look up.
*/
lvds_codec->bridge.of_node = dev->of_node;
- lvds_codec->bridge.funcs = &funcs;
drm_bridge_add(&lvds_codec->bridge);
platform_set_drvdata(pdev, lvds_codec);
--
2.30.2
