Decoder input LVDS format is a property of the decoder chip or even its strapping. Add DT property data-mapping the same way lvds-panel does, to define the LVDS data mapping. Signed-off-by: Marek Vasut <marex@xxxxxxx> Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx To: dri-devel@xxxxxxxxxxxxxxxxxxxxx --- V2: Rebase on latest next --- .../bindings/display/bridge/lvds-codec.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 304a1367faaa7..33e0c08933b72 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -64,6 +64,15 @@ properties: - port@0 - port@1 + data-mapping: + enum: + - jeida-18 + - jeida-24 + - vesa-24 + description: | + The color signals mapping order. See details in + Documentation/devicetree/bindings/display/panel/lvds.yaml + powerdown-gpios: description: The GPIO used to control the power down line of this device. @@ -71,6 +80,16 @@ properties: power-supply: true +if: + not: + properties: + compatible: + contains: + const: lvds-decoder +then: + properties: + data-mapping: false + required: - compatible - ports -- 2.30.2