Am Freitag, dem 09.07.2021 um 21:30 +0200 schrieb Sam Ravnborg: > Hi Yunus, > > On Fri, Jul 09, 2021 at 07:02:52PM +0000, Yunus Bas wrote: > > Hi Sam, > > > > Am Freitag, dem 09.07.2021 um 20:12 +0200 schrieb Sam Ravnborg: > > > Hi Yunus, > > > > > > On Tue, Jul 06, 2021 at 09:59:08AM +0200, Yunus Bas wrote: > > > > From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> > > > > > > > > This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) > > > > lcd > > > > panel to DRM simple panel driver. > > > > > > > > Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx> > > > > Signed-off-by: Yunus Bas <y.bas@xxxxxxxxx> > > > > --- > > > > Changes in v3: > > > > - No changes in general, added additional maintainers and also > > > > sending > > > > to general kernel mailing list > > > > --- > > > > drivers/gpu/drm/panel/panel-simple.c | 29 > > > > ++++++++++++++++++++++++++++ > > > > 1 file changed, 29 insertions(+) > > > > > > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > > > > b/drivers/gpu/drm/panel/panel-simple.c > > > > index 07433bff6c2b..8aba473a7592 100644 > > > > --- a/drivers/gpu/drm/panel/panel-simple.c > > > > +++ b/drivers/gpu/drm/panel/panel-simple.c > > > > @@ -1929,6 +1929,32 @@ static const struct panel_desc > > > > edt_et035012dm6 > > > > = { > > > > .bus_flags = DRM_BUS_FLAG_DE_LOW | > > > > DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE, > > > > }; > > > > > > > > +static const struct drm_display_mode edt_etm0350g0dh6_mode = { > > > > + .clock = 6520, > > > > + .hdisplay = 320, > > > > + .hsync_start = 320 + 20, > > > > + .hsync_end = 320 + 20 + 68, > > > > + .htotal = 320 + 20 + 68, > > > > + .vdisplay = 240, > > > > + .vsync_start = 240 + 4, > > > > + .vsync_end = 240 + 4 + 18, > > > > + .vtotal = 240 + 4 + 18, > > > > + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, > > > > +}; > > > > + > > > > +static const struct panel_desc edt_etm0350g0dh6 = { > > > > + .modes = &edt_etm0350g0dh6_mode, > > > > + .num_modes = 1, > > > > + .bpc = 6, > > > > + .size = { > > > > + .width = 70, > > > > + .height = 53, > > > > + }, > > > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, > > > > + .bus_flags = DRM_BUS_FLAG_DE_HIGH | > > > > DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE, > > > > + .connector_type = DRM_MODE_CONNECTOR_DPI, > > > > +}; > > > > + > > > > static const struct drm_display_mode edt_etm043080dh6gp_mode = > > > > { > > > > .clock = 10870, > > > > .hdisplay = 480, > > > > @@ -4355,6 +4381,9 @@ static const struct of_device_id > > > > platform_of_match[] = { > > > > }, { > > > > .compatible = "edt,et035012dm6", > > > > .data = &edt_et035012dm6, > > > > + }, { > > > > + .compatible = "edt,etm0350g0dh6", > > > > + .data = &edt_etm0350g0dh6, > > > > > > The compatible "edt,etm0350g0dh6" is not documented. > > > You likely need to add it to panel-simple.yaml - and likewise for > > > the > > > first patch. > > > > > > dt people like binding patches in separate patches so add them > > > both in > > > one dedicated patch. > > > > I've already sent devicetree patches. Here is the link: > > https://lore.kernel.org/linux-devicetree/20210331181317.464926-1-y.bas@xxxxxxxxx/ > > > > It was just pending and waiting for these patches. Shall I send > > again? > I have likely deleted the patches already, so please resend. > Been mostly offline for a period and then one week wihtout access to > my > linux box, and have to delete a lot to avoid getting too much behind. No problem, I'll resend them ASAP. Regards, Yunus > > Sam -- Mit freundlichen Grüßen Yunus Bas -Software Engineer- PHYTEC Messtechnik GmbH Robert-Koch-Str. 39 55129 Mainz Germany Tel.: +49 (0)6131 9221- 466 Web: www.phytec.de Sie finden uns auch auf: Facebook, LinkedIn, Xing, YouTube PHYTEC Messtechnik GmbH | Robert-Koch-Str. 39 | 55129 Mainz, Germany Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber | Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE 149059855 This E-Mail may contain confidential or privileged information. If you are not the intended recipient (or have received this E-Mail in error) please notify the sender immediately and destroy this E-Mail. Any unauthorized copying, disclosure or distribution of the material in this E-Mail is strictly forbidden.