Hi Yunus,
On Tue, Jul 06, 2021 at 09:59:08AM +0200, Yunus Bas wrote:
> From: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
>
> This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
> panel to DRM simple panel driver.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
> Signed-off-by: Yunus Bas <y.bas@xxxxxxxxx>
> ---
> Changes in v3:
> - No changes in general, added additional maintainers and also sending
> to general kernel mailing list
> ---
> drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 07433bff6c2b..8aba473a7592 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1929,6 +1929,32 @@ static const struct panel_desc edt_et035012dm6 = {
> .bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
> };
>
> +static const struct drm_display_mode edt_etm0350g0dh6_mode = {
> + .clock = 6520,
> + .hdisplay = 320,
> + .hsync_start = 320 + 20,
> + .hsync_end = 320 + 20 + 68,
> + .htotal = 320 + 20 + 68,
> + .vdisplay = 240,
> + .vsync_start = 240 + 4,
> + .vsync_end = 240 + 4 + 18,
> + .vtotal = 240 + 4 + 18,
> + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
> +};
> +
> +static const struct panel_desc edt_etm0350g0dh6 = {
> + .modes = &edt_etm0350g0dh6_mode,
> + .num_modes = 1,
> + .bpc = 6,
> + .size = {
> + .width = 70,
> + .height = 53,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> + .connector_type = DRM_MODE_CONNECTOR_DPI,
> +};
> +
> static const struct drm_display_mode edt_etm043080dh6gp_mode = {
> .clock = 10870,
> .hdisplay = 480,
> @@ -4355,6 +4381,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "edt,et035012dm6",
> .data = &edt_et035012dm6,
> + }, {
> + .compatible = "edt,etm0350g0dh6",
> + .data = &edt_etm0350g0dh6,
The compatible "edt,etm0350g0dh6" is not documented.
You likely need to add it to panel-simple.yaml - and likewise for the
first patch.
dt people like binding patches in separate patches so add them both in
one dedicated patch.
Sam
