Re: [PATCH v2 1/2] drm/dp_mst: Do not set proposed vcpi directly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2021-06-15 11:55 p.m., Wayne Lin wrote:
> [Why]
> When we receive CSN message to notify one port is disconnected, we will
> implicitly set its corresponding num_slots to 0. Later on, we will
> eventually call drm_dp_update_payload_part1() to arrange down streams.
> 
> In drm_dp_update_payload_part1(), we iterate over all proposed_vcpis[]
> to do the update. Not specific to a target sink only. For example, if we
> light up 2 monitors, Monitor_A and Monitor_B, and then we unplug
> Monitor_B. Later on, when we call drm_dp_update_payload_part1() to try
> to update payload for Monitor_A, we'll also implicitly clean payload for
> Monitor_B at the same time. And finally, when we try to call
> drm_dp_update_payload_part1() to clean payload for Monitor_B, we will do
> nothing at this time since payload for Monitor_B has been cleaned up
> previously.
> 
> For StarTech 1to3 DP hub, it seems like if we didn't update DPCD payload
> ID table then polling for "ACT Handled"(BIT_1 of DPCD 002C0h) will fail
> and this polling will last for 3 seconds.
> 
> Therefore, guess the best way is we don't set the proposed_vcpi[]
> diretly. Let user of these herlper functions to set the proposed_vcpi
> directly.
> 
> [How]
> 1. Revert commit 7617e9621bf2 ("drm/dp_mst: clear time slots for ports
> invalid")
> 2. Tackle the issue in previous commit by skipping those trasient
> proposed VCPIs. These stale VCPIs shoulde be explicitly cleared by
> user later on.
> 
> Changes since v1:
> * Change debug macro to use drm_dbg_kms() instead
> * Amend the commit message to add Fixed & Cc tags
> 
> Signed-off-by: Wayne Lin <Wayne.Lin@xxxxxxx>
> Fixes: 7617e9621bf2 ("drm/dp_mst: clear time slots for ports invalid")
> Cc: Lyude Paul <lyude@xxxxxxxxxx>
> Cc: Wayne Lin <Wayne.Lin@xxxxxxx>
> Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> Cc: Maxime Ripard <mripard@xxxxxxxxxx>
> Cc: Thomas Zimmermann <tzimmermann@xxxxxxx>
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: <stable@xxxxxxxxxxxxxxx> # v5.5+
> ---
>  drivers/gpu/drm/drm_dp_mst_topology.c | 36 ++++++++-------------------
>  1 file changed, 10 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> index 32b7f8983b94..b41b837db66d 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -2501,7 +2501,7 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
>  {
>  	struct drm_dp_mst_topology_mgr *mgr = mstb->mgr;
>  	struct drm_dp_mst_port *port;
> -	int old_ddps, old_input, ret, i;
> +	int old_ddps, ret;
>  	u8 new_pdt;
>  	bool new_mcs;
>  	bool dowork = false, create_connector = false;
> @@ -2533,7 +2533,6 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
>  	}
>  
>  	old_ddps = port->ddps;
> -	old_input = port->input;
>  	port->input = conn_stat->input_port;
>  	port->ldps = conn_stat->legacy_device_plug_status;
>  	port->ddps = conn_stat->displayport_device_plug_status;
> @@ -2555,28 +2554,6 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
>  		dowork = false;
>  	}
>  
> -	if (!old_input && old_ddps != port->ddps && !port->ddps) {
> -		for (i = 0; i < mgr->max_payloads; i++) {
> -			struct drm_dp_vcpi *vcpi = mgr->proposed_vcpis[i];
> -			struct drm_dp_mst_port *port_validated;
> -
> -			if (!vcpi)
> -				continue;
> -
> -			port_validated =
> -				container_of(vcpi, struct drm_dp_mst_port, vcpi);
> -			port_validated =
> -				drm_dp_mst_topology_get_port_validated(mgr, port_validated);
> -			if (!port_validated) {
> -				mutex_lock(&mgr->payload_lock);
> -				vcpi->num_slots = 0;
> -				mutex_unlock(&mgr->payload_lock);
> -			} else {
> -				drm_dp_mst_topology_put_port(port_validated);
> -			}
> -		}
> -	}
> -
>  	if (port->connector)
>  		drm_modeset_unlock(&mgr->base.lock);
>  	else if (create_connector)
> @@ -3410,8 +3387,15 @@ int drm_dp_update_payload_part1(struct drm_dp_mst_topology_mgr *mgr)
>  				port = drm_dp_mst_topology_get_port_validated(
>  				    mgr, port);
>  				if (!port) {
> -					mutex_unlock(&mgr->payload_lock);
> -					return -EINVAL;
> +					if (vcpi->num_slots == payload->num_slots) {
> +						cur_slots += vcpi->num_slots;
> +						payload->start_slot = req_payload.start_slot;
> +						continue;
> +					} else {
> +						drm_dbg_kms("Fail:set payload to invalid sink");

drm_dbg_kms takes a drm_device as first parameter.

Harry

> +						mutex_unlock(&mgr->payload_lock);
> +						return -EINVAL;
> +					}
>  				}
>  				put_port = true;
>  			}
> 




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux