Christian.
Am 14.06.21 um 19:10 schrieb Marek
Olšák:
The call to the hw scheduler has a limitation on the size of all parameters combined. I think we can only pass a 32-bit sequence number and a ~16-bit global (per-GPU) syncobj handle in one call and not much else.
The syncobj handle can be an element index in a global (per-GPU) syncobj table and it's read only for all processes with the exception of the signal command. Syncobjs can either have per VMID write access flags for the signal command (slow), or any process can write to any syncobjs and only rely on the kernel checking the write log (fast).
In any case, we can execute the memory write in the queue engine and only use the hw scheduler for logging, which would be perfect.
Marek
On Thu, Jun 10, 2021 at 12:33 PM Christian König <ckoenig.leichtzumerken@xxxxxxxxx> wrote:
Hi guys,
maybe soften that a bit. Reading from the shared memory of the user fence is ok for everybody. What we need to take more care of is the writing side.
So my current thinking is that we allow read only access, but writing a new sequence value needs to go through the scheduler/kernel.
So when the CPU wants to signal a timeline fence it needs to call an IOCTL. When the GPU wants to signal the timeline fence it needs to hand that of to the hardware scheduler.
If we lockup the kernel can check with the hardware who did the last write and what value was written.
That together with an IOCTL to give out sequence number for implicit sync to applications should be sufficient for the kernel to track who is responsible if something bad happens.
In other words when the hardware says that the shader wrote stuff like 0xdeadbeef 0x0 or 0xffffffff into memory we kill the process who did that.
If the hardware says that seq - 1 was written fine, but seq is missing then the kernel blames whoever was supposed to write seq.
Just pieping the write through a privileged instance should be fine to make sure that we don't run into issues.
Christian.
Am 10.06.21 um 17:59 schrieb Marek Olšák:
Hi Daniel,
We just talked about this whole topic internally and we came up to the conclusion that the hardware needs to understand sync object handles and have high-level wait and signal operations in the command stream. Sync objects will be backed by memory, but they won't be readable or writable by processes directly. The hardware will log all accesses to sync objects and will send the log to the kernel periodically. The kernel will identify malicious behavior.
Example of a hardware command stream:...ImplicitSyncWait(syncObjHandle, sequenceNumber); // the sequence number is assigned by the kernel
Draw();ImplicitSyncSignalWhenDone(syncObjHandle);...
I'm afraid we have no other choice because of the TLB invalidation overhead.
Marek
On Wed, Jun 9, 2021 at 2:31 PM Daniel Vetter <daniel@xxxxxxxx> wrote:
On Wed, Jun 09, 2021 at 03:58:26PM +0200, Christian König wrote:
> Am 09.06.21 um 15:19 schrieb Daniel Vetter:
> > [SNIP]
> > > Yeah, we call this the lightweight and the heavyweight tlb flush.
> > >
> > > The lighweight can be used when you are sure that you don't have any of the
> > > PTEs currently in flight in the 3D/DMA engine and you just need to
> > > invalidate the TLB.
> > >
> > > The heavyweight must be used when you need to invalidate the TLB *AND* make
> > > sure that no concurrently operation moves new stuff into the TLB.
> > >
> > > The problem is for this use case we have to use the heavyweight one.
> > Just for my own curiosity: So the lightweight flush is only for in-between
> > CS when you know access is idle? Or does that also not work if userspace
> > has a CS on a dma engine going at the same time because the tlb aren't
> > isolated enough between engines?
>
> More or less correct, yes.
>
> The problem is a lightweight flush only invalidates the TLB, but doesn't
> take care of entries which have been handed out to the different engines.
>
> In other words what can happen is the following:
>
> 1. Shader asks TLB to resolve address X.
> 2. TLB looks into its cache and can't find address X so it asks the walker
> to resolve.
> 3. Walker comes back with result for address X and TLB puts that into its
> cache and gives it to Shader.
> 4. Shader starts doing some operation using result for address X.
> 5. You send lightweight TLB invalidate and TLB throws away cached values for
> address X.
> 6. Shader happily still uses whatever the TLB gave to it in step 3 to
> accesses address X
>
> See it like the shader has their own 1 entry L0 TLB cache which is not
> affected by the lightweight flush.
>
> The heavyweight flush on the other hand sends out a broadcast signal to
> everybody and only comes back when we are sure that an address is not in use
> any more.
Ah makes sense. On intel the shaders only operate in VA, everything goes
around as explicit async messages to IO blocks. So we don't have this, the
only difference in tlb flushes is between tlb flush in the IB and an mmio
one which is independent for anything currently being executed on an
egine.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
