Re: [PATCH v2 1/2] drm/msm: add compatibles for sm8150/sm8250 display

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 16, 2021 at 10:06 AM Jonathan Marek <jonathan@xxxxxxxx> wrote:
>
> On 2/16/21 11:54 AM, Dmitry Baryshkov wrote:
> > On Mon, 15 Feb 2021 at 19:25, Jonathan Marek <jonathan@xxxxxxxx> wrote:
> >>
> >> The driver already has support for sm8150/sm8250, but the compatibles were
> >> never added.
> >>
> >> Also inverse the non-mdp4 condition in add_display_components() to avoid
> >> having to check every new compatible in the condition.
> >>
> >> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> >> ---
> >>   Documentation/devicetree/bindings/display/msm/dpu.txt | 4 ++--
> >>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c               | 2 ++
> >>   drivers/gpu/drm/msm/msm_drv.c                         | 6 +++---
> >>   3 files changed, 7 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> >> index 551ae26f60da..5763f43200a0 100644
> >> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> >> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> >> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
> >>
> >>   MDSS:
> >>   Required properties:
> >> -- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> >> +- compatible:  "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sm8150-mdss", "qcom,sm8250-mdss"
> >>   - reg: physical base address and length of contoller's registers.
> >>   - reg-names: register region names. The following region is required:
> >>     * "mdss"
> >> @@ -41,7 +41,7 @@ Optional properties:
> >>
> >>   MDP:
> >>   Required properties:
> >> -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> >> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sm8150-dpu", "qcom,sm8250-dpu"
> >>   - reg: physical base address and length of controller's registers.
> >>   - reg-names : register region names. The following region is required:
> >>     * "mdp"
> >
> > These two chunks should probably go to the separate patch 'dt-bindings:...'.
> >
>
> In this case I think its better to have this change in the same patch,
> but maybe one of the Robs will disagree.

I *think* typically the reason to split dt bindings into their own
patch is that devicetree@ list isn't interested in reviewing driver
changes, just binding changes..

In this case since it is just adding a compatible I think it is ok..
(or at least ok by me, but maybe other-Rob disagrees ;-))

> > Also, could you please pinpoint the reason for adding more
> > compatibility strings, while they map to the same internal data?
> > I think we might want instead to use some generic name for the dpu
> > block, like "qcom,dpu" or "qcom,mdp-dpu" instead of specifying the
> > platform name.
> >
>
> sdm845 and sc7180 aren't using generic compatibles, this is just being
> consistent with that.

It is good to have a device specific compatible up front, even if we
fallback to the more generic one for matching.. just in case we find a
reason for needing it later

BR,
-R

> >
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> >> index 5a8e3e1fc48c..fff12a4c8bfc 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> >> @@ -1219,6 +1219,8 @@ static const struct dev_pm_ops dpu_pm_ops = {
> >>   static const struct of_device_id dpu_dt_match[] = {
> >>          { .compatible = "qcom,sdm845-dpu", },
> >>          { .compatible = "qcom,sc7180-dpu", },
> >> +       { .compatible = "qcom,sm8150-dpu", },
> >> +       { .compatible = "qcom,sm8250-dpu", },
> >>          {}
> >>   };
> >>   MODULE_DEVICE_TABLE(of, dpu_dt_match);
> >> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> >> index 94525ac76d4e..928f13d4bfbc 100644
> >> --- a/drivers/gpu/drm/msm/msm_drv.c
> >> +++ b/drivers/gpu/drm/msm/msm_drv.c
> >> @@ -1185,9 +1185,7 @@ static int add_display_components(struct device *dev,
> >>           * Populate the children devices, find the MDP5/DPU node, and then add
> >>           * the interfaces to our components list.
> >>           */
> >> -       if (of_device_is_compatible(dev->of_node, "qcom,mdss") ||
> >> -           of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss") ||
> >> -           of_device_is_compatible(dev->of_node, "qcom,sc7180-mdss")) {
> >> +       if (!of_device_is_compatible(dev->of_node, "qcom,mdp4")) {
> >>                  ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
> >>                  if (ret) {
> >>                          DRM_DEV_ERROR(dev, "failed to populate children devices\n");
> >> @@ -1320,6 +1318,8 @@ static const struct of_device_id dt_match[] = {
> >>          { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
> >>          { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
> >>          { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
> >> +       { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
> >> +       { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
> >>          {}
> >>   };
> >>   MODULE_DEVICE_TABLE(of, dt_match);
> >> --
> >> 2.26.1
> >>
> >
> >
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux