On Tue, 16 Feb 2021 at 21:06, Jonathan Marek <jonathan@xxxxxxxx> wrote:
>
> On 2/16/21 11:54 AM, Dmitry Baryshkov wrote:
> > On Mon, 15 Feb 2021 at 19:25, Jonathan Marek <jonathan@xxxxxxxx> wrote:
> >>
> >> The driver already has support for sm8150/sm8250, but the compatibles were
> >> never added.
> >>
> >> Also inverse the non-mdp4 condition in add_display_components() to avoid
> >> having to check every new compatible in the condition.
> >>
> >> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> >> ---
> >> Documentation/devicetree/bindings/display/msm/dpu.txt | 4 ++--
> >> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
> >> drivers/gpu/drm/msm/msm_drv.c | 6 +++---
> >> 3 files changed, 7 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
> >> index 551ae26f60da..5763f43200a0 100644
> >> --- a/Documentation/devicetree/bindings/display/msm/dpu.txt
> >> +++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
> >> @@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
> >>
> >> MDSS:
> >> Required properties:
> >> -- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss"
> >> +- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sm8150-mdss", "qcom,sm8250-mdss"
> >> - reg: physical base address and length of contoller's registers.
> >> - reg-names: register region names. The following region is required:
> >> * "mdss"
> >> @@ -41,7 +41,7 @@ Optional properties:
> >>
> >> MDP:
> >> Required properties:
> >> -- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
> >> +- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sm8150-dpu", "qcom,sm8250-dpu"
> >> - reg: physical base address and length of controller's registers.
> >> - reg-names : register region names. The following region is required:
> >> * "mdp"
> >
> > These two chunks should probably go to the separate patch 'dt-bindings:...'.
> >
>
> In this case I think its better to have this change in the same patch,
> but maybe one of the Robs will disagree.
>
> > Also, could you please pinpoint the reason for adding more
> > compatibility strings, while they map to the same internal data?
> > I think we might want instead to use some generic name for the dpu
> > block, like "qcom,dpu" or "qcom,mdp-dpu" instead of specifying the
> > platform name.
> >
>
> sdm845 and sc7180 aren't using generic compatibles, this is just being
> consistent with that.
Well, I suppose the common case is to use the 'first compatible' entry
if the entities are compatible. The generic compatibles is a proposal,
not an affirmation. Please excuse me if it sounded in a different way.
>
> >
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> >> index 5a8e3e1fc48c..fff12a4c8bfc 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> >> @@ -1219,6 +1219,8 @@ static const struct dev_pm_ops dpu_pm_ops = {
> >> static const struct of_device_id dpu_dt_match[] = {
> >> { .compatible = "qcom,sdm845-dpu", },
> >> { .compatible = "qcom,sc7180-dpu", },
> >> + { .compatible = "qcom,sm8150-dpu", },
> >> + { .compatible = "qcom,sm8250-dpu", },
> >> {}
> >> };
> >> MODULE_DEVICE_TABLE(of, dpu_dt_match);
> >> diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
> >> index 94525ac76d4e..928f13d4bfbc 100644
> >> --- a/drivers/gpu/drm/msm/msm_drv.c
> >> +++ b/drivers/gpu/drm/msm/msm_drv.c
> >> @@ -1185,9 +1185,7 @@ static int add_display_components(struct device *dev,
> >> * Populate the children devices, find the MDP5/DPU node, and then add
> >> * the interfaces to our components list.
> >> */
> >> - if (of_device_is_compatible(dev->of_node, "qcom,mdss") ||
> >> - of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss") ||
> >> - of_device_is_compatible(dev->of_node, "qcom,sc7180-mdss")) {
> >> + if (!of_device_is_compatible(dev->of_node, "qcom,mdp4")) {
> >> ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
> >> if (ret) {
> >> DRM_DEV_ERROR(dev, "failed to populate children devices\n");
> >> @@ -1320,6 +1318,8 @@ static const struct of_device_id dt_match[] = {
> >> { .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
> >> { .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
> >> { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
> >> + { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
> >> + { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
> >> {}
> >> };
> >> MODULE_DEVICE_TABLE(of, dt_match);
> >> --
> >> 2.26.1
> >>
> >
> >
--
With best wishes
Dmitry
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
