On Tue, Jan 19, 2021 at 03:34:47PM +0100, Daniel Vetter wrote: > On Tue, Jan 19, 2021 at 3:32 PM Greg Kroah-Hartman > <gregkh@xxxxxxxxxxxxxxxxxxx> wrote: > > > > On Tue, Jan 19, 2021 at 09:17:55AM +0100, Daniel Vetter wrote: > > > On Fri, Nov 27, 2020 at 5:42 PM Daniel Vetter <daniel.vetter@xxxxxxxx> wrote: > > > > > > > > Since 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims > > > > the region") /dev/kmem zaps ptes when the kernel requests exclusive > > > > acccess to an iomem region. And with CONFIG_IO_STRICT_DEVMEM, this is > > > > the default for all driver uses. > > > > > > > > Except there's two more ways to access PCI BARs: sysfs and proc mmap > > > > support. Let's plug that hole. > > > > > > > > For revoke_devmem() to work we need to link our vma into the same > > > > address_space, with consistent vma->vm_pgoff. ->pgoff is already > > > > adjusted, because that's how (io_)remap_pfn_range works, but for the > > > > mapping we need to adjust vma->vm_file->f_mapping. The cleanest way is > > > > to adjust this at at ->open time: > > > > > > > > - for sysfs this is easy, now that binary attributes support this. We > > > > just set bin_attr->mapping when mmap is supported > > > > - for procfs it's a bit more tricky, since procfs pci access has only > > > > one file per device, and access to a specific resources first needs > > > > to be set up with some ioctl calls. But mmap is only supported for > > > > the same resources as sysfs exposes with mmap support, and otherwise > > > > rejected, so we can set the mapping unconditionally at open time > > > > without harm. > > > > > > > > A special consideration is for arch_can_pci_mmap_io() - we need to > > > > make sure that the ->f_mapping doesn't alias between ioport and iomem > > > > space. There's only 2 ways in-tree to support mmap of ioports: generic > > > > pci mmap (ARCH_GENERIC_PCI_MMAP_RESOURCE), and sparc as the single > > > > architecture hand-rolling. Both approach support ioport mmap through a > > > > special pfn range and not through magic pte attributes. Aliasing is > > > > therefore not a problem. > > > > > > > > The only difference in access checks left is that sysfs PCI mmap does > > > > not check for CAP_RAWIO. I'm not really sure whether that should be > > > > added or not. > > > > > > > > Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > > > > Reviewed-by: Dan Williams <dan.j.williams@xxxxxxxxx> > > > > Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx> > > > > Cc: Jason Gunthorpe <jgg@xxxxxxxx> > > > > Cc: Kees Cook <keescook@xxxxxxxxxxxx> > > > > Cc: Dan Williams <dan.j.williams@xxxxxxxxx> > > > > Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> > > > > Cc: John Hubbard <jhubbard@xxxxxxxxxx> > > > > Cc: Jérôme Glisse <jglisse@xxxxxxxxxx> > > > > Cc: Jan Kara <jack@xxxxxxx> > > > > Cc: Dan Williams <dan.j.williams@xxxxxxxxx> > > > > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > > > > Cc: linux-mm@xxxxxxxxx > > > > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > > > Cc: linux-samsung-soc@xxxxxxxxxxxxxxx > > > > Cc: linux-media@xxxxxxxxxxxxxxx > > > > Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> > > > > Cc: linux-pci@xxxxxxxxxxxxxxx > > > > Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx> > > > > -- > > > > v2: > > > > - Totally new approach: Adjust filp->f_mapping at open time. Note that > > > > this now works on all architectures, not just those support > > > > ARCH_GENERIC_PCI_MMAP_RESOURCE > > > > --- > > > > drivers/pci/pci-sysfs.c | 4 ++++ > > > > drivers/pci/proc.c | 1 + > > > > 2 files changed, 5 insertions(+) > > > > > > > > diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c > > > > index d15c881e2e7e..3f1c31bc0b7c 100644 > > > > --- a/drivers/pci/pci-sysfs.c > > > > +++ b/drivers/pci/pci-sysfs.c > > > > @@ -929,6 +929,7 @@ void pci_create_legacy_files(struct pci_bus *b) > > > > b->legacy_io->read = pci_read_legacy_io; > > > > b->legacy_io->write = pci_write_legacy_io; > > > > b->legacy_io->mmap = pci_mmap_legacy_io; > > > > + b->legacy_io->mapping = iomem_get_mapping(); > > > > pci_adjust_legacy_attr(b, pci_mmap_io); > > > > error = device_create_bin_file(&b->dev, b->legacy_io); > > > > if (error) > > > > @@ -941,6 +942,7 @@ void pci_create_legacy_files(struct pci_bus *b) > > > > b->legacy_mem->size = 1024*1024; > > > > b->legacy_mem->attr.mode = 0600; > > > > b->legacy_mem->mmap = pci_mmap_legacy_mem; > > > > + b->legacy_io->mapping = iomem_get_mapping(); > > > > > > Unlike the normal pci stuff below, the legacy files here go boom > > > because they're set up much earlier in the boot sequence. This only > > > affects HAVE_PCI_LEGACY architectures, which aren't that many. So what > > > should we do here now: > > > - drop the devmem revoke for these > > > - rework the init sequence somehow to set up these files a lot later > > > - redo the sysfs patch so that it doesn't take an address_space > > > pointer, but instead a callback to get at that (since at open time > > > everything is set up). Imo rather ugly > > > - ditch this part of the series (since there's not really any takers > > > for the latter parts it might just not make sense to push for this) > > > - something else? > > > > > > Bjorn, Greg, thoughts? > > > > What sysfs patch are you referring to here? > > Currently in linux-next: > > commit 74b30195395c406c787280a77ae55aed82dbbfc7 (HEAD -> > topic/iomem-mmap-vs-gup, drm/topic/iomem-mmap-vs-gup) > Author: Daniel Vetter <daniel.vetter@xxxxxxxx> > Date: Fri Nov 27 17:41:25 2020 +0100 > > sysfs: Support zapping of binary attr mmaps > > Or the patch right before this one in this submission here: > > https://lore.kernel.org/dri-devel/20201127164131.2244124-12-daniel.vetter@xxxxxxxx/ Ah. Hm, a callback in the sysfs file logic seems really hairy, so I would prefer that not happen. If no one really needs this stuff, why not just drop it like you mention? thanks, greg k-h _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel