Re: [PATCH v7 12/17] PCI: Revoke mappings like devmem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 19, 2021 at 3:32 PM Greg Kroah-Hartman
<gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
>
> On Tue, Jan 19, 2021 at 09:17:55AM +0100, Daniel Vetter wrote:
> > On Fri, Nov 27, 2020 at 5:42 PM Daniel Vetter <daniel.vetter@xxxxxxxx> wrote:
> > >
> > > Since 3234ac664a87 ("/dev/mem: Revoke mappings when a driver claims
> > > the region") /dev/kmem zaps ptes when the kernel requests exclusive
> > > acccess to an iomem region. And with CONFIG_IO_STRICT_DEVMEM, this is
> > > the default for all driver uses.
> > >
> > > Except there's two more ways to access PCI BARs: sysfs and proc mmap
> > > support. Let's plug that hole.
> > >
> > > For revoke_devmem() to work we need to link our vma into the same
> > > address_space, with consistent vma->vm_pgoff. ->pgoff is already
> > > adjusted, because that's how (io_)remap_pfn_range works, but for the
> > > mapping we need to adjust vma->vm_file->f_mapping. The cleanest way is
> > > to adjust this at at ->open time:
> > >
> > > - for sysfs this is easy, now that binary attributes support this. We
> > >   just set bin_attr->mapping when mmap is supported
> > > - for procfs it's a bit more tricky, since procfs pci access has only
> > >   one file per device, and access to a specific resources first needs
> > >   to be set up with some ioctl calls. But mmap is only supported for
> > >   the same resources as sysfs exposes with mmap support, and otherwise
> > >   rejected, so we can set the mapping unconditionally at open time
> > >   without harm.
> > >
> > > A special consideration is for arch_can_pci_mmap_io() - we need to
> > > make sure that the ->f_mapping doesn't alias between ioport and iomem
> > > space. There's only 2 ways in-tree to support mmap of ioports: generic
> > > pci mmap (ARCH_GENERIC_PCI_MMAP_RESOURCE), and sparc as the single
> > > architecture hand-rolling. Both approach support ioport mmap through a
> > > special pfn range and not through magic pte attributes. Aliasing is
> > > therefore not a problem.
> > >
> > > The only difference in access checks left is that sysfs PCI mmap does
> > > not check for CAP_RAWIO. I'm not really sure whether that should be
> > > added or not.
> > >
> > > Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > > Reviewed-by: Dan Williams <dan.j.williams@xxxxxxxxx>
> > > Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
> > > Cc: Jason Gunthorpe <jgg@xxxxxxxx>
> > > Cc: Kees Cook <keescook@xxxxxxxxxxxx>
> > > Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
> > > Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> > > Cc: John Hubbard <jhubbard@xxxxxxxxxx>
> > > Cc: Jérôme Glisse <jglisse@xxxxxxxxxx>
> > > Cc: Jan Kara <jack@xxxxxxx>
> > > Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
> > > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> > > Cc: linux-mm@xxxxxxxxx
> > > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > > Cc: linux-samsung-soc@xxxxxxxxxxxxxxx
> > > Cc: linux-media@xxxxxxxxxxxxxxx
> > > Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> > > Cc: linux-pci@xxxxxxxxxxxxxxx
> > > Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
> > > --
> > > v2:
> > > - Totally new approach: Adjust filp->f_mapping at open time. Note that
> > >   this now works on all architectures, not just those support
> > >   ARCH_GENERIC_PCI_MMAP_RESOURCE
> > > ---
> > >  drivers/pci/pci-sysfs.c | 4 ++++
> > >  drivers/pci/proc.c      | 1 +
> > >  2 files changed, 5 insertions(+)
> > >
> > > diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> > > index d15c881e2e7e..3f1c31bc0b7c 100644
> > > --- a/drivers/pci/pci-sysfs.c
> > > +++ b/drivers/pci/pci-sysfs.c
> > > @@ -929,6 +929,7 @@ void pci_create_legacy_files(struct pci_bus *b)
> > >         b->legacy_io->read = pci_read_legacy_io;
> > >         b->legacy_io->write = pci_write_legacy_io;
> > >         b->legacy_io->mmap = pci_mmap_legacy_io;
> > > +       b->legacy_io->mapping = iomem_get_mapping();
> > >         pci_adjust_legacy_attr(b, pci_mmap_io);
> > >         error = device_create_bin_file(&b->dev, b->legacy_io);
> > >         if (error)
> > > @@ -941,6 +942,7 @@ void pci_create_legacy_files(struct pci_bus *b)
> > >         b->legacy_mem->size = 1024*1024;
> > >         b->legacy_mem->attr.mode = 0600;
> > >         b->legacy_mem->mmap = pci_mmap_legacy_mem;
> > > +       b->legacy_io->mapping = iomem_get_mapping();
> >
> > Unlike the normal pci stuff below, the legacy files here go boom
> > because they're set up much earlier in the boot sequence. This only
> > affects HAVE_PCI_LEGACY architectures, which aren't that many. So what
> > should we do here now:
> > - drop the devmem revoke for these
> > - rework the init sequence somehow to set up these files a lot later
> > - redo the sysfs patch so that it doesn't take an address_space
> > pointer, but instead a callback to get at that (since at open time
> > everything is set up). Imo rather ugly
> > - ditch this part of the series (since there's not really any takers
> > for the latter parts it might just not make sense to push for this)
> > - something else?
> >
> > Bjorn, Greg, thoughts?
>
> What sysfs patch are you referring to here?

Currently in linux-next:

commit 74b30195395c406c787280a77ae55aed82dbbfc7 (HEAD ->
topic/iomem-mmap-vs-gup, drm/topic/iomem-mmap-vs-gup)
Author: Daniel Vetter <daniel.vetter@xxxxxxxx>
Date:   Fri Nov 27 17:41:25 2020 +0100

   sysfs: Support zapping of binary attr mmaps

Or the patch right before this one in this submission here:

https://lore.kernel.org/dri-devel/20201127164131.2244124-12-daniel.vetter@xxxxxxxx/

Cheers, Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux