On 30/11/2020 12:02, Tomi Valkeinen wrote: > On 30/11/2020 11:47, Laurent Pinchart wrote: > >>>> Hasn't Boris commented in his review of v1 that bus flags should be set >>>> in atomic_check, even when they're static ? We're moving towards >>>> removing timings->input_bus_flags, so this patch goes in the wrong >>>> direction :-S >>> >>> We have atomic_check only if the bridge has implemented atomic funcs. And even if there's >>> atomic_check, not all bridges set the bus_flags there. So we need to either 1) fix the issue for now >>> as in this patch, or 2) convert all bridges to use atomic funcs and fix all the bridges to set the >>> bus_flags. >> >> The second option is what we'd like to achieve. Wouldn't it be best to >> already start going in that direction ? We don't need to convert all >> bridge drivers in one go here, just the ones that are used by tidss. > > I think that sounds fine, except that this is blocking the DisplayPort support for J7. We have > everything in for DP except dts changes (can be added only when the drivers work), and the connector > stuff. > > The connector stuff includes this series (so that tidss supports the new connector model), and > "[PATCH RESEND v3 0/2] drm: add DisplayPort connector", which adds the connector driver. > > The bridges currently used (that I know of) with tidss are cdns-mhdp, tfp410 and sii9022. I don't > expect converting those would be a huge job, but I'd still really like to get the DP working in > upstream without starting to expand the scope of the patches we need to enable it. > > That said, we missed 5.11 so perhaps we have the time. Looks like Boris was missing from Cc in this series. Adding him. Tomi -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
