On Wed, 2020-10-14 at 12:44 +0800, CK Hu wrote: > Hi, Chunfeng: > > On Tue, 2020-10-13 at 16:52 +0800, Chunfeng Yun wrote: > > Convert HDMI PHY binding to YAML schema mediatek,ufs-phy.yaml > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > > --- > > v2: fix binding check warning of reg in example > > --- > > .../display/mediatek/mediatek,hdmi.txt | 17 +--- > > .../bindings/phy/mediatek,hdmi-phy.yaml | 90 +++++++++++++++++++ > > 2 files changed, 91 insertions(+), 16 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt > > index 7b124242b0c5..edac18951a75 100644 > > --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt > > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt > > @@ -50,22 +50,7 @@ Required properties: > > > > HDMI PHY > > ======== > > - > > -The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel > > -output and drives the HDMI pads. > > - > > -Required properties: > > -- compatible: "mediatek,<chip>-hdmi-phy" > > -- reg: Physical base address and length of the module's registers > > -- clocks: PLL reference clock > > -- clock-names: must contain "pll_ref" > > -- clock-output-names: must be "hdmitx_dig_cts" on mt8173 > > -- #phy-cells: must be <0> > > -- #clock-cells: must be <0> > > - > > -Optional properties: > > -- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa > > -- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c > > +See phy/mediatek,hdmi-phy.yaml > > > > Example: > > > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml > > new file mode 100644 > > index 000000000000..77df50204606 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/phy/mediatek,hdmi-phy.yaml > > @@ -0,0 +1,90 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +# Copyright (c) 2020 MediaTek > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/phy/mediatek,hdmi-phy.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: MediaTek High Definition Multimedia Interface (HDMI) PHY binding > > + > > +maintainers: > > + - CK Hu <ck.hu@xxxxxxxxxxxx> > > I think you should remove "CK Hu <ck.hu@xxxxxxxxxxxx>" and add latest > mediatek drm maintainer: Ok, will do it, thanks > > DRM DRIVERS FOR MEDIATEK > M: Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> > M: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > L: dri-devel@xxxxxxxxxxxxxxxxxxxxx > S: Supported > F: Documentation/devicetree/bindings/display/mediatek/ > F: drivers/gpu/drm/mediatek/ > > Regards, > CK _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
